Who sell hedders for 64-66

[BIGPIMP]

i'm looking for a deal on some headers that fit 64-66 that don't have to force fit .who sells them .new

[Rich 5150 69]

http://www.sandersonheaders.com/prod...roducts_id=199
Try here

[leftcoast66]

summitracing.com has a great selection of a bunch of different companies, so you can base them off of what your need is.

I'm running hooker super comp's and love them, but you'll want a bit of a motor behind them or they just make it all bogged down.

[Captainfab]

Hedman makes them specifically for the '63-'66 trucks, but they aren't even close to equal length tubes. You can use certain ones that are intended for later model trucks. What transmission are you running, an automatic or manual?

[BIGPIMP]

Originally Posted by Captainfab

Hedman makes them specifically for the '63-'66 trucks, but they aren't even close to equal length tubes. You can use certain ones that are intended for later model trucks. What transmission are you running, an automatic or manual?

it's a 350 auto

[Captainfab]

Then you can use most headers for trucks up thru '87. I don't remember how low your truck is, so the stanfard long tube headers may hang lower than you want? Here are a couple of headers that will fit, although they are long tubes.

http://www.summitracing.com/parts/HOK-2452HKR/

http://www.summitracing.com/parts/HED-69090/

Here's another set, but they don't hang down as far.

http://www.summitracing.com/parts/HED-69230/

Here are the ones specifically for the trucks up through '66

http://www.summitracing.com/parts/HED-69260/

Originally Posted by BIGPIMP

it's a 350 auto