Any steering wheels of choice? Pics please

[1LowToy]

I was hoping to make a trip to a couple of pick a part yards tomorrow and finding a smaller steering wheel. Anything other Chevy steering wheels fit?

PS The wife thnks I'm finding parts for the old Benz SHHHH. (Snicker Snicker)

[Scootin 81 C20]

An 88-98 wheel will fit.

[b454rat]

I like the Cavalier wheels, they are smaller so you have some leg room, padded, look 10 times better than the huge ferris wheels these trucks came with.

[78 Chevyrado]

I think all of the GM non-air bag wheels swap back and forth. If you can take your wheel with you and compare them.

[Scootin 81 C20]

Does anybody know if a 67-72 wheel will fit in an 81????

[78 Chevyrado]

Originally Posted by Scootin 81 C20

Does anybody know if a 67-72 wheel will fit in an 81????

I think it will.... I've seen a 67-72 with a 78 or so wheel in it, on the 67-72 column.

[thirdstreettito]

I like my ferris wheels.

[dammitmitchell]

i just buy grant gt wheels.. well worth the cash

[S10Fan]

'62 Chevy wheel on a 85 Blazer column.

[TexasJeff]

Early to mid 70's Camaro/Vega/Nova wheel about 14" diameter.

[68 TT]

Originally Posted by TexasJeff

Early to mid 70's Camaro/Vega/Nova wheel about 14" diameter.

I found a gray one of those on a Chevette. I have it in my 67 C-10.

[68Timber]

I'm using this one in my Blazer.



You probably won't find it in a junkyard, but it's a Grant copy of a wheel used in older Corvettes and I'm pretty sure it was used in some Chevelles. That is my favorite Chevy steering wheel.

[Chlsnk]

Originally Posted by TexasJeff

Early to mid 70's Camaro/Vega/Nova wheel about 14" diameter.

Ahh this is my favorite steering wheel! I had the same one on my 72 El camino and I found another one here recently I want top put on my truck.

[68 TT]

Originally Posted by BRUISER

I'm using this one in my Blazer.



You probably won't find it in a junkyard, but it's a Grant copy of a wheel used in older Corvettes and I'm pretty sure it was used in some Chevelles. That is my favorite Chevy steering wheel.

It was optional on first gen Camaro's too. I had one and had to wear gloves when I drove the car home from work. The rivets got really hot in an enclosed car in the Mojave Desert. So did the chrome shifter ball.

[68Timber]

Originally Posted by 68 TT

It was optional on first gen Camaro's too. I had one and had to wear gloves when I drove the car home from work. The rivets got really hot in an enclosed car in the Mojave Desert. So did the chrome shifter ball.

It's been in a box in the "parts pile" for a while now. I've only had it on a few weeks so it hasn't had a chance to char my hands yet. I put it on to force motivation to get the rest of the interior pieces I need and freshen it up.

I do like that late 70's 4-spoke Z28 wheel pictured earlier, that looks good in the truck. But with a non-tilt column on these trucks, I don't like anything smaller than a 15" steering wheel so it doesn't clip the view of the top of the gauges.

[Adams74Chevy]

I'm at work or else I'd go measure mine, but what is the stock diameter of our steering wheels?

[dbmx66]

this is the one i have. i like it alot

http://www.summitracing.com/parts/GRT-415/

[GMC Guy]

Originally Posted by dbmx66

this is the one i have. i like it alot

http://www.summitracing.com/parts/GRT-415/

i think a wheel like this, with a horn button like this would look cool.
http://shop.oreillyauto.com/productd...egoryCode=4021

that's the route i'm going.

[1LowToy]

I like that 80's Camaro steering wheel. I found one off of an S-10 today at UrJerkinit (PicknPull and pay out ragious taxes). I went there with a plan and all my tools slected for the job, so I thoght. I forgot to stop at a hardware store for a couple of 5/16 bolts for the wheel puller. I had one and took about an hour and a half to find another laying on the ground. That's just how it works at a UrJerkinit yard.

The steering wheel is from an S-10 but I see the same one on Astro vans.

Pics to follow. And keepem coming, I have a 30 day exchange,,, and another $25 bucks for gas to get there and back.

[xs-style]

Id eventually like to go with this

http://www.parts123.com/parts123/yb....501042~Z5Z5Z51


yes its a ferris wheel... but its a nicer ferris wheel

[68 TT]

Originally Posted by 1LowToy

I like that 80's Camaro steering wheel. I found one off of an S-10 today at UrJerkinit (PicknPull and pay out ragious taxes). I went there with a plan and all my tools slected for the job, so I thoght. I forgot to stop at a hardware store for a couple of 5/16 bolts for the wheel puller. I had one and took about an hour and a half to find another laying on the ground. That's just how it works at a UrJerkinit yard.

The steering wheel is from an S-10 but I see the same one on Astro vans.

Pics to follow. And keepem coming, I have a 30 day exchange,,, and another $25 bucks for gas tho get there and back.

I like that one too. My 83 Z/28 had the leather wrapped version. They are pretty hard to find in decent shape in the Camaro's. Good to know they were in some S-10 variants too.

[85X3]

I've had the three spoke Buick/Corvette comfort grip on my last few vehicles and really like the OE look. You can find them in several colors also. Merry Christmas.

[travo77]

Originally Posted by dbmx66

this is the one i have. i like it alot

http://www.summitracing.com/parts/GRT-415/

that is the one i have on my truck which I'm repainting a different color and using stainless steel bolts to replace the black ones

[Jimboland]

Originally Posted by S10Fan

'62 Chevy wheel on a 85 Blazer column.

That's awesome! I love those classic steering wheels.

[1979,GMC,1ton-addict]

hey i got a steering wheel alot like buiser's but mine is a smaller diameter with a lighter wood grain finish only thing is you need to get the horn kit/mounting hardware for it,it's not chevy dodge or anything it is completely aftermarket i'll get pics on here if ur interested