Quote:
Originally Posted by Normy71
Thanks Sicmaro
I have seen your post before but when you read so many you forget who's done what.
did you do anything with the steam line I have been reading about?
On your mounts you just added a adapter plate to bolt on you stock 71 motor mounts and that was all?
I will have a bunch more questions if your interested in helping a guy out.
|
Ya i made an adapter similar to the plate adapter already out there. reused the stock 71 engine and frame mounts.

The fans are stock LS1 camaro/firebird/corvette 98-up. i trimmed the lower part of the fan to fit into the stock 71 fan shroud mounts then made plates that screwed into the upper fan shroud mount.

The steam line, my 71 radiator had an extra nipple in it so i ran the steam line to it..... pic below