11-24-2009, 07:54 PM | #1 |
Registered User
Join Date: Sep 2009
Location: phoenix az
Posts: 141
|
Belts squealing HELP!
Every time I start the truck the belts squeal like a pig till it gets warmed up. VERY ANNOYING!!! What can cause this? Also I was going to put in aluminum pulleys in, but the set I found says it's for a KEYWAY power steering pump, what is that?
|
11-24-2009, 10:04 PM | #2 |
Low & Fast!
Join Date: Jan 2007
Location: Knoxville, TN
Posts: 3,110
|
Re: Belts squealing HELP!
What year is yours?
And the Keyway is on the shaft of the power steering pump, if your has a nut that holds the pully on then it has a keyway.
__________________
|
11-25-2009, 10:54 AM | #3 |
Registered User
Join Date: Sep 2009
Location: phoenix az
Posts: 141
|
Re: Belts squealing HELP!
it is a 78, no A/C. I wanted to post pictures to your post "how many 2wd blazers do we have", but i have no camera.
|
12-28-2009, 01:02 AM | #4 |
Registered User
Join Date: Sep 2007
Location: Austin, Tx
Posts: 50
|
Re: Belts squealing HELP!
try tighting your belt or replace them if they have cracks in them.
__________________
truck junkie |
12-28-2009, 01:07 AM | #5 |
Registered User
Join Date: Oct 2004
Location: Fort Collins, Colorado
Posts: 376
|
Re: Belts squealing HELP!
Try tightening your belts. You could diagnose further by removing belts one by one, starting the truck briefly, to find which one is the culprit. I only have one belt, and it squeals when the weather is cold. I think mine is mainly due to the p/s pump starting to go bad.
__________________
'99 K1500 Tahoe, 2dr, barn doors - 350/ 4L60E, 3.73 '01 K2500HD Silverado Ext Cab - 496/ Allison, 4.10 |
12-28-2009, 07:07 AM | #6 |
78K & 79C Jimmys
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,901
|
Re: Belts squealing HELP!
squirt wd40 on the belts( bit should work)
__________________
John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 |
12-28-2009, 11:06 AM | #7 |
Registered User
Join Date: Sep 2009
Location: phoenix az
Posts: 141
|
Re: Belts squealing HELP!
thanks, the old belts were failing so I replaced and no more noise!
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|