|
01-08-2010, 06:58 PM
|
#1 |
|
Registered User
Join Date: Jul 2008
Location: Round Rock, Tx
Posts: 249
|
Dash Pad question
What year dash pad will fit an 86? Are there any differences between say an 80 dash pad versus an 86 dash pad? Or will any dash pad fit as long as it is from a 73-87 year truck? I have a line on a good pad but it is out of an 80 and I have a 86 any info you can give is appreciated.
|
|
|
|
01-08-2010, 07:07 PM
|
#2 |
|
Registered User
Join Date: Jul 2008
Location: Round Rock, Tx
Posts: 249
|
Re: Dash Pad question
Just talked to the seller and he said it wont fit an 86 :-( Here's the link in case it will help someone else out.
http://austin.craigslist.org/pts/1507391491.html |
|
|
|
|
01-08-2010, 08:15 PM
|
#3 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
Re: Dash Pad question
he lies it will fit on there BUT it is different in the design as you could see by looking at yours and his... I believe the 80 has the cut out for the VIN on the dash, I know the older ones had a VIN riveted to the cab . Its not the correct piece but it will fit, Ive put one on when i put an 82 cab onto my 76 frame and made it a 76 truck
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
01-08-2010, 08:21 PM
|
#4 |
|
6.0 powered square
Join Date: Feb 2008
Location: Mesquite texas
Posts: 3,459
|
Re: Dash Pad question
79-87 are on the dash but in 81 they moved to left a couple inches
__________________
Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 |
|
|
|
|
01-08-2010, 08:40 PM
|
#5 | |
|
Gettin It One Pice At A Time
Join Date: Oct 2004
Location: everett, washington
Posts: 2,688
|
Re: Dash Pad question
Quote:
__________________
RIP ELJAY   Work In Progress 1979 GMC C1500 Trailering Special. Getting the truck done, one piece at a time. “You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan “I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby |
|
|
|
|
|
01-08-2010, 09:21 PM
|
#6 |
|
It'd be alot cooler if you did
Join Date: May 2003
Location: Three Rivers, MI
Posts: 2,345
|
Re: Dash Pad question
buy it and sell me the door panels.
|
|
|
|
|
01-08-2010, 09:56 PM
|
#7 |
|
Robert Olson Transport
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
Re: Dash Pad question
he has to be a site member to conduct sales!
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
01-08-2010, 10:47 PM
|
#8 |
|
Registered User
Join Date: Jul 2008
Location: Round Rock, Tx
Posts: 249
|
Re: Dash Pad question
Thanks for the info guys looking and the pictures and comparing it to mine it looks like the dash insert it different. Would my silverado emblem fit on that insert?
|
|
|
|
|
01-09-2010, 02:37 AM
|
#9 |
|
Gettin It One Pice At A Time
Join Date: Oct 2004
Location: everett, washington
Posts: 2,688
|
Re: Dash Pad question
yeah, should be no problem. all trim lines in the trucks had one kind of dash pad and different inserts.
__________________
RIP ELJAY Work In Progress 1979 GMC C1500 Trailering Special. Getting the truck done, one piece at a time. “You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan “I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby Last edited by 79gmcc15; 01-09-2010 at 02:37 AM. |
|
|
|
|
01-09-2010, 03:26 AM
|
#10 |
|
Registered User
Join Date: Jan 2010
Location: Austin TX
Posts: 32
|
Re: Dash Pad question
that is a sweet deal
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
