|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-10-2010, 10:28 PM
|
#1 |
|
Registered User
Join Date: Jun 2009
Location: Eugene, OR
Posts: 200
|
Heater Control Levers help...
Just ordered a set of heater control levers to replace the broken levers in my '66 C10. I removed the screws that hold the heater facia to the dash, thinking that it would slide forward through the dash, but it didn't move forward or back. What else is holding the unit in place, and does it pull out through the dash or from behind? Thanks.
Gary
__________________
Project Build (1): http://67-72chevytrucks.com/vboard/s...d.php?t=362482 Project build (2): http://67-72chevytrucks.com/vboard/s...d.php?t=370985 “Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming...Wow, What a Ride!” - Hunter S. Thompson |
|
|
|
01-11-2010, 12:57 AM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Heater Control Levers help...
There is a brace that goes from the heater control down to the lower edge of the dash....just one bolt. Then it goes to the inside of the dash.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
