|
02-20-2010, 01:39 PM
|
#1 |
|
Registered User
Join Date: Feb 2005
Location: Denver, Co.
Posts: 11
|
rear brake problems
I am having problems bleeding the rear brakes, when I open the rear wheel cylinder, the pedal does not go to the floor. It does go to the floor for the front. I have replaced the wheel cylinders and still no luck. any Ideas?
Last edited by jrf790; 02-20-2010 at 01:41 PM. Reason: mis spelled word |
|
|
|
02-20-2010, 01:56 PM
|
#2 |
|
Registered User
Join Date: Jan 2002
Location: Canton, Georgia, USA
Posts: 1,119
|
Re: rear brake problems
Maybe trash in the lines? Just taking a stab at it.
__________________
Jeremy (NUBOMB) 72K5 CST 350/350/205 1951 Chevy 1/2 ton North Georgia Group "... And the first rule to being a man is you gotta spend your life doing crap you don't wanna do." Red Forman. |
|
|
|
|
02-20-2010, 08:08 PM
|
#3 |
|
Registered User
Join Date: Jan 2010
Location: GREENEVILLE TENNESSEE
Posts: 1,310
|
Re: rear brake problems
Stuck proportioning valve...Try bleeding it at the master cylinder 1st, then the pro. valve next...you may have to push on the rubber plunger on the end of the valve a few times...If you can,t get fluid there, you may have to change it out.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
