|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-28-2010, 02:22 AM
|
#1 |
|
Registered User
Join Date: Apr 2009
Location: merced, ca
Posts: 42
|
Need some shim help????
I lowered my 76 but the wheels are tilting in?? where do I need to shim to get them back straight again!!! If you have pics that would help alot to!!!!
Thanks!!!!!!!!!! 
|
|
|
|
03-28-2010, 08:55 AM
|
#2 | |
|
just can't cover up my redneck
Join Date: May 2004
Location: Columbus OH
Posts: 11,414
|
Re: Need some shim help????
At the alignment shop. This is not something you can just do "until it looks right".
__________________
You can review the site's rules here. Quote:
Bad planning on your part does not necessarily constitute an instant emergency on my part.... The great thing about being a pessimist is that you are either pleasantly surprised or right. 
|
|
|
|
|
|
03-28-2010, 09:42 AM
|
#3 |
|
The One And Only !!!
Join Date: Jan 2007
Location: Hole in the woods Florida
Posts: 4,567
|
Re: Need some shim help????
If you have a long distance to drive to a alignment shop you can add the same thickness shims to the upper control arm mounting bolts both front and rear bolts, Then you won't tear your tires up getting there.
But, As LONGHAIR said it needs to be done/finished by professionals....
__________________
93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz !  The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. "Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
|
|
|
|
|
03-28-2010, 06:21 PM
|
#4 |
|
BMW & ASE Master Certified
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,266
|
Re: Need some shim help????
just like he said, Harbor Freight has a shim kit for like 5 bucks... I used that same kit to align my truck (We have an alignment machine at work)
clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
