Newtz '67 swb - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 04-21-2010, 07:20 AM

they just say v8 but they will work with a big block.

http://www.performanceonline.com/sto...cat=455&page=1

Check out this thread for some pics. He swapped to solid motor mounts but you can't see them in the pics.

http://67-72chevytrucks.com/vboard/s...d.php?t=392716

Newtz67 · 04-21-2010, 01:12 PM

Quote:

Originally Posted by djracer

they just say v8 but they will work with a big block.

http://www.performanceonline.com/sto...cat=455&page=1

Check out this thread for some pics. He swapped to solid motor mounts but you can't see them in the pics.

http://67-72chevytrucks.com/vboard/s...d.php?t=392716

Perfect, those are the ones I was looking at. Thanks again for your help!

Newtz67 · 04-24-2010, 02:47 PM

I have another question, I'm having a hell of a time finding headers for the 454. I want 1 7/8" primary tubes minimum. I would prefer 2 1/8" primary tubes with 3" to 3 !/2" collectors. I'm just not sure what will fit in the '67. Thanks again for any help!

**seafoam68** · 04-24-2010, 10:09 PM

I also have the same burning question about headers. I need a set that won't hang below the frame rails. Anybody with ideas?

djracer · 04-24-2010, 10:45 PM

Quote:

Originally Posted by seafoam68

I also have the same burning question about headers. I need a set that won't hang below the frame rails. Anybody with ideas?

I'll try to post some pics of the the ones in the link. Here is one from the top but they don't hang down much I'll try to get a pic tomorrow afternoon.

djracer · 04-24-2010, 08:57 PM

a friend of mine just bought these and they fit pretty sweet

http://www.hedman.com/products/?id=3479

Newtz67 · 04-25-2010, 04:37 PM

Quote:

Originally Posted by djracer

a friend of mine just bought these and they fit pretty sweet

http://www.hedman.com/products/?id=3479

Thank you! Those are very nice but not sure I want to spend that much.

Newtz67 · 04-25-2010, 05:20 PM

Did a little detail work.

djracer · 04-25-2010, 09:08 PM

Quote:

Originally Posted by Newtz67

Thank you! Those are very nice but not sure I want to spend that much.

They make them uncoated also. I helped him crank his motor for the first time today and we had to pull the spark plugs. I am in love with these hedders. I will probably buy a set for my son's truck. I'll post a pic of how far they hang down in a little bit.

Newtz67 · 04-25-2010, 09:20 PM

Quote:

Originally Posted by djracer

They make them uncoated also. I helped him crank his motor for the first time today and we had to pull the spark plugs. I am in love with these hedders. I will probably buy a set for my son's truck. I'll post a pic of how far they hang down in a little bit.

Awesome!

oldblue1968chevy · 04-24-2010, 09:44 PM

Sweet!

*highperf4x4* · 04-24-2010, 10:48 PM

Awesome!! I am subscribed.

I'll be needing a set of those headers too so I'll keep an eye out for what you use.

weircc · 04-24-2010, 11:26 PM

Quote:

Originally Posted by highperf4x4

Awesome!! I am subscribed.

I'll be needing a set of those headers too so I'll keep an eye out for what you use.

me too!!!

VA72C10 · 04-25-2010, 05:37 PM

Good work! Like the artistic shot

And nice foosball table

Newtz67 · 04-25-2010, 06:16 PM

Quote:

Originally Posted by VA72C10

Good work! Like the artistic shot

And nice foosball table

Haha, thanks!

sourkraut · 04-25-2010, 07:43 PM

pretty stout looking engine!

Newtz67 · 04-25-2010, 09:20 PM

Quote:

Originally Posted by sourkraut

pretty stout looking engine!

Thank you sir!

*highperf4x4* · 04-25-2010, 10:27 PM

Sweet. What kind of paint did you use?

Newtz67 · 04-26-2010, 07:31 PM

Quote:

Originally Posted by highperf4x4

Sweet. What kind of paint did you use?

Sorry, I missed your post earlier. I'm using duplicolor red. I actually painted the intake too, with duplicolor aluminum. An old timer I know told me an aluminum intake is much easier to keep clean if it's painted. Made sense to me so I'm trying it out this time. Even if you look close you won't even be able to tell it's painted when I'm done, The color is very close to the same.

Pilot-209 · 04-26-2010, 08:41 PM

I like your red highlights! I have valve covers almost identical to yours so I'm think I might do that too. Did you just do it with a small brush?

Newtz67 · 04-26-2010, 09:11 PM

Quote:

Originally Posted by Pilot-209

I like your red highlights! I have valve covers almost identical to yours so I'm think I might do that too. Did you just do it with a small brush?

No, actually we took the time to tape everything off in between and sprayed them, but it would probably be just as easy to use a brush. On the intake letters I sprayed some paint into a freeze plug and used a tooth pick snapped in half haha. Worked pretty well!

**seafoam68** · 04-26-2010, 10:12 PM

Hello again, Newtz. It looks like we are building pretty much the same motor, except you are way ahead of me! Just wandering if you will have access to a dyno when you're done? I like what you have done so far, looking good!

djracer · 04-25-2010, 10:40 PM

Here the pic I promised.

Newtz67 · 04-25-2010, 10:51 PM

Thanks alot djracer!

wp silverado · 04-25-2010, 10:57 PM

great looking start you have newtz il be watching

04-21-2010, 07:20 AM	#1
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Newtz '67 swb they just say v8 but they will work with a big block. http://www.performanceonline.com/sto...cat=455&page=1 Check out this thread for some pics. He swapped to solid motor mounts but you can't see them in the pics. http://67-72chevytrucks.com/vboard/s...d.php?t=392716 __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

04-24-2010, 02:47 PM	#3
Newtz67 Registered User Join Date: Mar 2010 Location: A t w a t e r, Ca Posts: 1,201	Re: Newtz '67 swb I have another question, I'm having a hell of a time finding headers for the 454. I want 1 7/8" primary tubes minimum. I would prefer 2 1/8" primary tubes with 3" to 3 !/2" collectors. I'm just not sure what will fit in the '67. Thanks again for any help!

04-24-2010, 10:09 PM	#4
seafoam68 Senior Member Join Date: Oct 2009 Location: Chattanooga, TN Posts: 259	Re: Newtz '67 swb I also have the same burning question about headers. I need a set that won't hang below the frame rails. Anybody with ideas?

04-24-2010, 08:57 PM	#6
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Newtz '67 swb a friend of mine just bought these and they fit pretty sweet http://www.hedman.com/products/?id=3479 __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

04-25-2010, 05:20 PM	#8
Newtz67 Registered User Join Date: Mar 2010 Location: A t w a t e r, Ca Posts: 1,201	Re: Newtz '67 swb Did a little detail work. Attached Images

04-24-2010, 09:44 PM	#11
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Newtz '67 swb Sweet! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-24-2010, 10:48 PM	#12
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: Newtz '67 swb Awesome!! I am subscribed. I'll be needing a set of those headers too so I'll keep an eye out for what you use.

04-25-2010, 05:37 PM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Newtz '67 swb Good work! Like the artistic shot And nice foosball table __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-25-2010, 07:43 PM	#16
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: Newtz '67 swb pretty stout looking engine! __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

04-25-2010, 10:27 PM	#18
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: Newtz '67 swb Sweet. What kind of paint did you use?

04-26-2010, 08:41 PM	#20
Pilot-209 Registered User Join Date: Jan 2010 Location: Livingston, California Posts: 6	Re: Newtz '67 swb I like your red highlights! I have valve covers almost identical to yours so I'm think I might do that too. Did you just do it with a small brush?

04-26-2010, 10:12 PM	#22
seafoam68 Senior Member Join Date: Oct 2009 Location: Chattanooga, TN Posts: 259	Re: Newtz '67 swb Hello again, Newtz. It looks like we are building pretty much the same motor, except you are way ahead of me! Just wandering if you will have access to a dyno when you're done? I like what you have done so far, looking good!

04-25-2010, 10:40 PM	#23
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Newtz '67 swb Here the pic I promised. Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

04-25-2010, 10:51 PM	#24
Newtz67 Registered User Join Date: Mar 2010 Location: A t w a t e r, Ca Posts: 1,201	Re: Newtz '67 swb Thanks alot djracer!

04-25-2010, 10:57 PM	#25
wp silverado Registered User Join Date: Oct 2009 Location: sykesville MD Posts: 200	Re: Newtz '67 swb great looking start you have newtz il be watching __________________ 1967 c-10-built smallblock, backed by m-21, lowered 2005 silverado-tint, exhaust, lift, 35's 1964 c-10 shortbed project



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.