|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-27-2010, 08:49 PM
|
#1 |
|
Registered User
Join Date: Jan 2009
Location: Pittsburg ks
Posts: 3
|
49 chevy floor replacement
I have started to cut the floor out of my 49 chevy does anyone know how to put a complete floor pan in? Mainly I need help with how to take out the rockers and where to weld the pan to the cab. SHould I cut the rockers out the grind it down to how I need it or?
Thanks |
|
|
|
04-28-2010, 12:11 AM
|
#2 |
|
Registered User
Join Date: Sep 2006
Location: thousand oaks, California
Posts: 732
|
Re: 49 chevy floor replacement
it ain't easy!!! make sure your all braced up before you remove any of the floor. once you remove your floor the cab will flex and then your can of worms is wide open.....
the best plan for a floor is a bunch of patience and lots of time... but no worries a lot of rookies have done this. post some picts and we might be able to help you decide what has to be replaced.... GT
__________________
Greg 1953 chevy 1/2 ton 5 window, chevy 350 330 horse 700r tranz, lowering spindels mustang 2 frount. ford 9", airbags on 4 corners . purchased in 1983 for $325 while in high school http://67-72chevytrucks.com/vboard/s...=215079&page=5 |
|
|
|
|
04-28-2010, 10:27 AM
|
#3 |
|
Registered User
Join Date: Apr 2010
Location: Morristown TN.
Posts: 355
|
Re: 49 chevy floor replacement
I replaced the complete floor in my '49.I braced the cab everywhere and then removed it frome the frame and flipped it onto its back.With the cab on its back this seemed to make it alot easier to work on.As for the floor i used dynacorn they have a complete floor that has all the factory braces and fits back in like a glove.I included a picture of my truck at its current stage and can take more pictures of the floor if you would like.Hope this helps and good luck!
|
|
|
|
|
04-29-2010, 09:22 AM
|
#4 |
|
Registered User
Join Date: Jul 2007
Location: Lufkin Texas
Posts: 213
|
Re: 49 chevy floor replacement
I would like to see some pics especialy if you have some of the install.
|
|
|
|
|
04-29-2010, 09:49 AM
|
#5 |
|
Registered User
Join Date: Apr 2010
Location: Morristown TN.
Posts: 355
|
Re: 49 chevy floor replacement
some of the pictures of when we put the floor in are on an old cell phone i have.I have been trying to get them off of it but havent had much luck.I will tell you that all i did was cut the old floor out close to where it is spot welded in at and then i used an air hammer to finish getting the rest of the metel around the spot welds.Once all the old metal was out and everything was cleaned up the new floor went back in like factory.
|
|
|
|
|
04-29-2010, 12:01 PM
|
#6 | |
|
Registered User
Join Date: Nov 2008
Location: Moore, OK
Posts: 16
|
Re: 49 chevy floor replacement
Quote:
Greg, Did you just tack in some rebarb to stiffen everything up before you cut it out? I'm going to be replacing mine here shortly too so I am trying to formulate a game plan. |
|
|
|
|
|
04-29-2010, 06:11 PM
|
#7 |
|
Registered User
Join Date: Sep 2006
Location: thousand oaks, California
Posts: 732
|
Re: 49 chevy floor replacement
on my floor i only replaced kick panels and a section near the clutch most of my floor is original.. suprizing for an oregon truck! even then i did some braces just incase.
GT
__________________
Greg 1953 chevy 1/2 ton 5 window, chevy 350 330 horse 700r tranz, lowering spindels mustang 2 frount. ford 9", airbags on 4 corners . purchased in 1983 for $325 while in high school http://67-72chevytrucks.com/vboard/s...=215079&page=5 |
|
|
|
|
04-29-2010, 07:59 PM
|
#8 |
|
Registered User
Join Date: Jan 2009
Location: Pittsburg ks
Posts: 3
|
Re: 49 chevy floor replacement
I can post any pics it wont let me. they are to big
Last edited by jfweaver; 04-29-2010 at 08:00 PM. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
