The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-25-2010, 06:46 PM   #1
RustyBucket
Registered User
 
RustyBucket's Avatar
 
Join Date: Jul 2009
Location: Space Coast, Fl.
Posts: 1,055
'72 Jimmy 2wd.

I've been wanting a convertible and found this Jimmy 2wd. 350/350, ps, pb, ugly add on air. It's pretty wavy and has rusty floors but from 25ft. away it doesn't look bad. Seems to run, drive and stop pretty good, lots of rattles & sqeaks though. I'm not going to pull it all to pieces for now. I want to keep it in the shop with the top off and drive it evenings when it's cooler. I want to lower it some, change the wheels and DRIVE IT. Maybe buy some new bumpers and I need a back seat of some kind. Has headers and dual exh. and sounds pretty good. It had been driven very little in the last 10yrs. and seems to run better the more I drive it. Fresh gas and advancing the timing helped it a lot.
Attached Images
   
__________________
Dad always said, "Son, WISH IN ONE HAND, and ......."
--------------------------------------
--------------------------------------
Current toy trucks:
'71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C
'72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt

Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these:
'66 Plymouth Belvedere City of Miami cop car clone.
'70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!!
'67 C10 short/step side mount spare -- SOLD!!
'72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!!
'69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!!
RustyBucket is offline   Reply With Quote
Old 06-25-2010, 08:37 PM   #2
Thealien
Senior Member
 
Thealien's Avatar
 
Join Date: Jun 2007
Location: Pine Ridge Florida
Posts: 4,135
Re: '72 Jimmy 2wd.

Nice , now get that top off!!

Enjoy
Thealien is offline   Reply With Quote
Old 06-25-2010, 09:45 PM   #3
RustyBucket
Registered User
 
RustyBucket's Avatar
 
Join Date: Jul 2009
Location: Space Coast, Fl.
Posts: 1,055
Re: '72 Jimmy 2wd.

I've got a neighbor interested my '67 project truck(s). I need some shop space before I take the top off. I'm going to study the site and get some options for lowering and tire and wheel sizes. Maybe some info on a back seat too.
__________________
Dad always said, "Son, WISH IN ONE HAND, and ......."
--------------------------------------
--------------------------------------
Current toy trucks:
'71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C
'72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt

Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these:
'66 Plymouth Belvedere City of Miami cop car clone.
'70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!!
'67 C10 short/step side mount spare -- SOLD!!
'72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!!
'69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!!
RustyBucket is offline   Reply With Quote
Old 06-25-2010, 11:41 PM   #4
Yukon Jack
Post Whore
 
Yukon Jack's Avatar
 
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,686
Re: '72 Jimmy 2wd.

You've got the right idea - drive it! Changing out the front bumper and some different rims will be a great addition.
__________________
1970 Blazer with a 400 sbc and 4" lift
1980 Pontiac Trans Am, 455 Oldsmobile
2012 Kawasaki Concours 14
Yukon Jack is offline   Reply With Quote
Old 06-26-2010, 12:18 AM   #5
bouncytruck
SKINNY TIRES RULE!
 
bouncytruck's Avatar
 
Join Date: Sep 2001
Location: Bothell, WA
Posts: 11,038
Re: '72 Jimmy 2wd.

Pull the top and enjoy! You live in the sunny part of the country, so go for it! Wheels and rear seats can come after you pop the top. There is nothing like driving a classic convertible truck!
__________________
bouncytruck 1972 K5
The Hauler 1994 K1500 Suburban
The Daily2010 Kia Soul
Wife's Ride2014 Fiat 500L
bouncytruck is offline   Reply With Quote
Old 06-26-2010, 11:14 AM   #6
Tom Vogel
2WD Jimmy
 
Tom Vogel's Avatar
 
Join Date: Mar 2005
Location: Davis County, Utah
Posts: 2,565
Re: '72 Jimmy 2wd.

Welcome from a fellow 72 Jimmy 2wd owner.
Be smart... call Early Classic and definately go with their airbag system for the rear. The adjustability is worth the price and will reap huge dividends in usability.
Tom Vogel is offline   Reply With Quote
Old 06-26-2010, 12:43 PM   #7
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,267
Re: '72 Jimmy 2wd.

Looks pretty solid? How are the rocker/tortion boxes under it? Something to consider before pulling the top off...

If they're in decent shape, pull the top off, look for a rear seat out of a 4x4 or a burb that's being parted, chrome front and rear sport bumpers, new wheels, a drop, and have fun

It's always more fun spending someone else's money
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 06-26-2010, 04:07 PM   #8
RustyBucket
Registered User
 
RustyBucket's Avatar
 
Join Date: Jul 2009
Location: Space Coast, Fl.
Posts: 1,055
Re: '72 Jimmy 2wd.

I'm 'bout afraid to look under it........ looked at some pretty grizzly torsion box/rocker pictures in some build threads. I couldn't get under it before I bought it... have some health problems. I'm hoping my other truck is sold and gone and I'll be able to get it on the lift in a few days. I think it's always been a central Fl. veh. so chances are 50/50 it'll be bad rusty. I see there's a wealth of info on this site......... GOOD THING!, I'm sure I'll have plenty of questions. I do have a set of 8" 5 lug truck rally wheels that'll improve it's looks some. WAY TOO HOT to mess with any of it today.
__________________
Dad always said, "Son, WISH IN ONE HAND, and ......."
--------------------------------------
--------------------------------------
Current toy trucks:
'71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C
'72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt

Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these:
'66 Plymouth Belvedere City of Miami cop car clone.
'70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!!
'67 C10 short/step side mount spare -- SOLD!!
'72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!!
'69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!!
RustyBucket is offline   Reply With Quote
Old 06-27-2010, 04:14 PM   #9
FRENCHBLUE72
PROJECT 7DEUCE
 
FRENCHBLUE72's Avatar
 
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,606
Re: '72 Jimmy 2wd.

I see that it has the spare tire brackets on the back is that possibly a converted 4wd? Nice ride none the less and get that top pulled and cruise it..
__________________
GO BIG GREEN GO DUCKS



MEMBER #6377

72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free.

Project "7DEUCE"

check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665



Tim Powell..R.I.P EastSideLowlife..... R.I.P..
FRENCHBLUE72 is offline   Reply With Quote
Old 06-27-2010, 10:07 PM   #10
RustyBucket
Registered User
 
RustyBucket's Avatar
 
Join Date: Jul 2009
Location: Space Coast, Fl.
Posts: 1,055
Re: '72 Jimmy 2wd.

I did manage to get it on the lift, I don't see any evidence of it having been a 4x4. Does the VIN# indicate 2 or 4wd.? Underneath, the driver's side rocker is plastered up and funny shaped and the torque box has some rust holes in it. I can see some fiberglass cloth through the holes like somebody glassed inside the box before they plastered the rocker. The pass. side looks better--- no rust holes in that torque box. The door sills look pretty good on both sides. I'll take some pictures. I had NO idea there was so many places to trap water and rust in these things. All of the body mounts I saw were intact---- the rubber donuts were shot but the sheetmetal brackets looked ok. I'm pretty hopeful I can get away with enjoying this thing without a bunch of body work.
__________________
Dad always said, "Son, WISH IN ONE HAND, and ......."
--------------------------------------
--------------------------------------
Current toy trucks:
'71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C
'72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt

Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these:
'66 Plymouth Belvedere City of Miami cop car clone.
'70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!!
'67 C10 short/step side mount spare -- SOLD!!
'72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!!
'69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!!
RustyBucket is offline   Reply With Quote
Old 06-27-2010, 10:16 PM   #11
JimmyFloyd
Registered User
 
Join Date: Apr 2009
Location: Rochester, NY
Posts: 1,458
Re: '72 Jimmy 2wd.

The first couple digits will indicate if it was a 4x4. If the VIN has KE or KS in it, then it was a 4x4. if it is CE or CS, then it was an original 2wd.
__________________
1970 Blazer 350/SM465/205 SOLD! | 1998 Z3
JimmyFloyd is offline   Reply With Quote
Old 06-28-2010, 12:24 AM   #12
RustyBucket
Registered User
 
RustyBucket's Avatar
 
Join Date: Jul 2009
Location: Space Coast, Fl.
Posts: 1,055
Re: '72 Jimmy 2wd.

Thanks, I found that LMC decoder in the search. VIN starts out TCE182F.. looks like GMC, 2wd, V8, 3900-5800-GVW, JIMMY, '72, Flint. Got a copy of a Fl. title from '81 that shows previous reg. in NY. Also got a bundle of reciepts from an engine rebuild at 55,800mi---- shows 72,000 now. Apparently non original engine, paperwork says V0915PHM, I don't seem to be smart enough to ID it on MORTEC. I think I got one of the orig. wheel/tire/hubcap/beauty ring still fastened to the swing out spare carrier--- was that factory? Was there a roll bar option? I'm not a "matching numbers" guy, just curious. It's also got some kind of soft top folded up in the back that I haven't looked at yet.
__________________
Dad always said, "Son, WISH IN ONE HAND, and ......."
--------------------------------------
--------------------------------------
Current toy trucks:
'71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C
'72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt

Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these:
'66 Plymouth Belvedere City of Miami cop car clone.
'70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!!
'67 C10 short/step side mount spare -- SOLD!!
'72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!!
'69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!!
RustyBucket is offline   Reply With Quote
Old 06-28-2010, 09:14 AM   #13
JimmyFloyd
Registered User
 
Join Date: Apr 2009
Location: Rochester, NY
Posts: 1,458
Re: '72 Jimmy 2wd.

Quote:
Originally Posted by RustyBucket View Post
Thanks, I found that LMC decoder in the search. VIN starts out TCE182F.. looks like GMC, 2wd, V8, 3900-5800-GVW, JIMMY, '72, Flint. Got a copy of a Fl. title from '81 that shows previous reg. in NY. Also got a bundle of reciepts from an engine rebuild at 55,800mi---- shows 72,000 now. Apparently non original engine, paperwork says V0915PHM, I don't seem to be smart enough to ID it on MORTEC. I think I got one of the orig. wheel/tire/hubcap/beauty ring still fastened to the swing out spare carrier--- was that factory? Was there a roll bar option? I'm not a "matching numbers" guy, just curious. It's also got some kind of soft top folded up in the back that I haven't looked at yet.

Looks like the engine decodes as:

V = Flint Engine Plant
09 = September
15 = 15th
PHM = Can't seem to find this one just yet. There is a PH, which is a 78 305. This is the Engine suffix Code.

If this could possibly be the numbers matching motor, the last part of the VIN would be stamped next to this number on the front pad of the motor. See the example picture:

__________________
1970 Blazer 350/SM465/205 SOLD! | 1998 Z3

Last edited by JimmyFloyd; 06-28-2010 at 09:15 AM.
JimmyFloyd is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:00 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com