Interior Measurement, Seat and Door Panel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ClassicDreamer · 07-13-2010, 07:31 AM

Good Morning Everyone,
Wondering if someone can tell me the measurement from the top of the factory bench seat to the top of the stock door panels. How many inches higher is the bench than the door panels? The interior is completely out of mine and at the upholstery shop. Want the shop to tuck and roll the door panels, but want it to line up with the tuck and rolled seat. I will snap some shots later of the seat. Thanks! Hope this makes sense.

OrrieG · 07-13-2010, 01:28 PM

Here is some AD information, does not specifically show the interior door panels but you might be able to figure it out by correlating the window information to the seat information.

ClassicDreamer · 07-13-2010, 03:11 PM

Orrie,
this is great, do you have a more clear picture. Hard time reading the measurements or a link.
Thanks !

OrrieG · 07-13-2010, 07:40 PM

http://chevy.oldcarmanualproject.com...esto/index.htm

Schroll down to your year, lots of good information in these.

ClassicDreamer · 07-14-2010, 10:13 AM

Your the man orrie!
Thanks, Andrew

07-13-2010, 07:31 AM	#1
ClassicDreamer Registered User Join Date: Aug 2009 Location: NY NY Posts: 123	Interior Measurement, Seat and Door Panel Good Morning Everyone, Wondering if someone can tell me the measurement from the top of the factory bench seat to the top of the stock door panels. How many inches higher is the bench than the door panels? The interior is completely out of mine and at the upholstery shop. Want the shop to tuck and roll the door panels, but want it to line up with the tuck and rolled seat. I will snap some shots later of the seat. Thanks! Hope this makes sense.

07-13-2010, 01:28 PM	#2
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Interior Measurement, Seat and Door Panel Here is some AD information, does not specifically show the interior door panels but you might be able to figure it out by correlating the window information to the seat information. Attached Images __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

07-13-2010, 03:11 PM	#3
ClassicDreamer Registered User Join Date: Aug 2009 Location: NY NY Posts: 123	Re: Interior Measurement, Seat and Door Panel Orrie, this is great, do you have a more clear picture. Hard time reading the measurements or a link. Thanks !

07-13-2010, 07:40 PM	#4
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Interior Measurement, Seat and Door Panel http://chevy.oldcarmanualproject.com...esto/index.htm Schroll down to your year, lots of good information in these. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

07-14-2010, 10:13 AM	#5
ClassicDreamer Registered User Join Date: Aug 2009 Location: NY NY Posts: 123	Re: Interior Measurement, Seat and Door Panel Your the man orrie! Thanks, Andrew

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.