The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-14-2010, 10:43 AM   #1
62 Bowtie
Registered User
 
62 Bowtie's Avatar
 
Join Date: Nov 2008
Location: Elk Grove Ca
Posts: 629
Bag Diameter

I'm wondering if someone can explain the bag diameter difference is it for comfort or purpose, meaning more air means stiffer ride? or is diameter size referring to the coil diameter if my coils are 5" then should I buy 5" diameter bags thanks, Tony
62 Bowtie is offline   Reply With Quote
Old 09-14-2010, 01:27 PM   #2
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,068
Re: Bag Diameter

Mainly the bag diameters are a reference for 'spring diameter' to identify spacial limitations & the capacity typically follows. The larger the diameter, typically = larger capacity @ a similar psi & the more area required for the install.

Some guys assume less air volume = better (softer) ride. It has been my experience that this is not linear. I ran 7" bags on the rear of my 68 swb but had to keep so little air psi @ my desired ride height that it was 'bouncy' like the shocks were doing all the work. A swap to smaller diameter bags (which required more psi to achieve the same height) made the ride much more acceptable.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 09-14-2010, 03:26 PM   #3
ob1monkey
Registered User
 
Join Date: Dec 2008
Location: sanford,fl
Posts: 185
Re: Bag Diameter

I completely agree. My truck originally had 2500's in the front and 2600's in the back. Rode horrible to soft in the back and to stiff in the front. I swapped them front to back and dropped 30 psi in the front and added 20 psi to the back to achieve the same height. made a world off difference.

Last edited by ob1monkey; 09-14-2010 at 03:27 PM.
ob1monkey is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:56 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com