anyone know if the auto parts store carries.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

evobuilder · 09-19-2010, 10:38 PM

the stud on my power steering resevior? the back stud is broken, and I need to get another.... anyone know if this is something I can get from my local auto parts store, or am I going to have to source from a junk yard?
Thanks!

protrash64 · 09-19-2010, 11:07 PM

I cant remember if it has a nut on the shaft and is removable?? You may be able to replace it with different hardware and not need the original type stud. For instance, threaded rod and a locknut. Just a suggestion.

evobuilder · 09-19-2010, 11:21 PM

good call.... I will just grab a stud and a bolt.... it'll work just the same. Guess I have been in the shop too long today... can't seem to think about simple solutions to simple problems

markeb01 · 09-20-2010, 04:06 PM

Here are a couple of links showing replacement studs if you still want to go that way. May not be the same exact application, but a quick look should determine if it will work:

Amazon.com: 1963-1979 Corvette Power Steering...http://www.lategreatchevy.com/chevy-...roduct_Related

Somebody else may offer them cheaper.

09-19-2010, 10:38 PM	#1
evobuilder Registered User Join Date: Sep 2010 Location: Seattle, WA Posts: 39	anyone know if the auto parts store carries.... the stud on my power steering resevior? the back stud is broken, and I need to get another.... anyone know if this is something I can get from my local auto parts store, or am I going to have to source from a junk yard? Thanks! __________________ Evobuilder / Seattle, WA Hub Garage: www.hubgarage.com/mygarage/evobuilder

09-19-2010, 11:07 PM	#2
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: anyone know if the auto parts store carries.... I cant remember if it has a nut on the shaft and is removable?? You may be able to replace it with different hardware and not need the original type stud. For instance, threaded rod and a locknut. Just a suggestion. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

09-19-2010, 11:21 PM	#3
evobuilder Registered User Join Date: Sep 2010 Location: Seattle, WA Posts: 39	Re: anyone know if the auto parts store carries.... good call.... I will just grab a stud and a bolt.... it'll work just the same. Guess I have been in the shop too long today... can't seem to think about simple solutions to simple problems __________________ Evobuilder / Seattle, WA Hub Garage: www.hubgarage.com/mygarage/evobuilder

09-20-2010, 04:06 PM	#4
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: anyone know if the auto parts store carries.... Here are a couple of links showing replacement studs if you still want to go that way. May not be the same exact application, but a quick look should determine if it will work: Amazon.com: 1963-1979 Corvette Power Steering...http://www.lategreatchevy.com/chevy-...roduct_Related Somebody else may offer them cheaper.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.