|
11-11-2010, 10:41 PM
|
#3 |
|
Registered User
Join Date: Aug 2007
Location: Kansas
Posts: 366
|
Re: 82 4x4 conversion
 The big thing that I recently had to deal with was the motor mounts. The 4x4 is about 1/4 too tall to sleeve into a 2wd frame. I cut it down and welded it to make it work. Im not sure about the trans tunnel yet. Im still in the mock up stage myself. You have the parts truck on hand so you have it made! Good luck to ya |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode