CA Norcal spare parts

[Allensracing]

I am forced to downsize. My new house has about 6 less parking spots. I have most of the parts needed to put together three complete 60-66 shortbed stepside trucks, plus lots and lots and lots of spare parts. I will sell either complete project trucks, or I will part everything out. I hate to part with them.
I am keeping two trucks as my daily drivers and selling everything else. I will sell a complete project truck for $1200. they are all pretty much rust free. I have replaced the rusty parts with good ones. the cabs are not the original ones on the frames. I would prefer to sell the trucks complete and the parts separate, but I will do whatever necessary to get rid of my excess stuff.I have quite a few more parts than what is pictured here, I will update as I get them out of storage. I am not familiar with this forum. this is my first time using the forum. let me know what parts you need and I will post prices.

[kalirodding]

Any 61 grilles?

[Allensracing]

I have a complete GMC 60-63 truck and a lot of spare parts for the early style that is still in storage. the storage is about 300 miles from where I currently live. when I make enough room to bring up more stuff I will make another thread with the early stuff. I have a couple early grills, but I cant remember exactly what year or style

[WRO44]

Hey if you have any good 62 grilles I would definatly buy it off you!

[Touchdown67]

Hello Norcal... I am looking for a nice OE drivers side vent window handle for a 65 C10 LWB Fleet. I would take the pair if you have them. Do you have any good chrome bumpers? Also do you have a nice pair of inside sun visors for the same C10? Thank you...

[TwoFiftyShifter]

I am in need of 1 side of interior door handles, also the 2 top radiator support mounting braces, and am looking for a passenger side c10 mirror.

[Allensracing]

I do not have any chrome bumpers. I do not have any stock exterior mirrors. I have at least one pair of complete vent window assemblies in good condition, with knobs. I will dig though my pile of handles and post pics. what top radiator braces do you need? those panels that bolt on each side of the latch? I will also look for sun visors, I might have some but probably not that great of condition.

[TwoFiftyShifter]

Part #13 in this pic. I need both of those braces. Also if you have the rubber mounts for the stock radiator too, part # 11. let me know.

[Slammed66]

How about NICE front fenders, no filler, rust etc??

[Allensracing]

I have the braces, I will get pictures up soon.
I will dig up the nicest fenders I have and post pictures.
I live about 5 miles from where the trucks in the pic are parked, so I cant run and check too often.

[zooza1]

hey, i need the headlight buckets, adjusters and springs for a 64 -5-6 both sides. got any. i wish you were closer id have a cab for my truck! also interested in good front fenders. and a fleet tailgate? thanks i understand about not being very close to the trucks so i'll be patient.

[Allensracing]

I will spend my Friday afternoon digging through parts.
I will have answers and pictures in the afternoon.
Zoo, you could probably get an entire truck shipped out..

[zooza1]

shippings a killer from ca to tn! but maybe youll have some of the items i need. thanks

[Allensracing]

I have an account with fedex and I know how to box stuff up so it is as safe and cheap as possible. I will include shipping costs with my parts quotes as best I can.

[mannyb.]

do you have a complete heater assembly and or vent window assembly for 60-63? zip 92821

[mannyb.]

and 60-63 custom sail trim!!

[TwoFiftyShifter]

Ok Allen I found a set of door handles here in my garage. So when you get the chance quote me those two radiator brackets to 12586. thanks

[Allensracing]

well, so far I have found one of the radiator covers and two drivers side sun visors. there was a 60-63 style passenger side vent window.
I am still looking for other stuff.

[Allensracing]

here are a few more parts I found around the house. if you see something your interested in I can get better pictures.
I kinda like the grill, I had thoughs of using it as garage wall art, but I really need to downsize.

[Bob66]

Hey there Allen,
It's Bob, I was up there Sunday looking for the driveline support (found it here since then) Did you post a picture of that 60-61 GMC hood yet? Looks like you found some interest in your stuff, Hunh?

[Allensracing]

Originally Posted by Bob66

Hey there Allen,
It's Bob, I was up there Sunday looking for the driveline support (found it here since then) Did you post a picture of that 60-61 GMC hood yet? Looks like you found some interest in your stuff, Hunh?

december is notoriously the worst time of the year to try to clean out the garage parts, but there are a few interested people. I am going to wait a bit to list the GMC hood. I have a complete 62 GMC truck thats still down south, and I want to see if I can sell it together somehow the hood made it up here but not the rest of the truck.

Thanks for pointing me at this forum, I like it.

[kalirodding]

The picture of the grille is a 61. Don't care if it has surface rust but hows the dents? And how much if I come get it?

[Allensracing]

the outer shell of the grill has surface rust, nothing rotted through. the aluminum center is tweaked and dented. here is a couple photobucket links to a closeup. I have no clue what its worth, I have a thread in here trying to get an idea but no responses.

it must be worth a lot if your willing to drive from Lodi.... I used to live in Lodi and Stockton. Paz performance sponsered my 67 truck at 99 speedway

seriously, I have no clue. how about $100?
Grill

grill other side

[kalirodding]

For $100 I'll pass. Thanx anyways.

[Q.8]

do u have automatic column?