79 C10 seat ideas

[Greenlee]

Originally Posted by BigRed76

That actually doesnt look as complicated as it may sound, as long as you know someone with a cutting torch and welder But it looks nice, and gives me some good ideas for the future.

Oh and by the way...do you remember if those seats had the seat belt buckled built into them?

I was happy with the way it turned out. The thought crossed my mind to pull out the seats when I sold the truck.

I used the stock seat belts from my 76'. The 98' seats don't have the belt built in.
Posted via Mobile Device

[Jonboy]

I like those seats, too. They are a lot thicker in the back than the earlier seats. I am 6'1, and getting fat. I like the thinner seat. I looked at the brackets on my seat, and it looks like they used some rectangle tubing to make a riser at the front, and used the original '87 Tracks. Not too bad, if you can weld a little bit.

[J/D/S]

Thanks Jonboy

Well that settles it I'm going with the same bench that you have.

[J/D/S]

Stitch,


So this is the seat I'm going with I would like it all leather the color will be gray and with the same style stitching.

What do you think?

[Jonboy]

Originally Posted by J/D/S

Thanks Jonboy

Well that settles it I'm going with the same bench that you have.

I think you will be pleased. I have also found that having the armrest gives me a place to put the stereo faceplate, too. Just a thought.

[J/D/S]

Well just finished reading a PM from stitch, he said the best thing would be to do my bench like the red and black picture I posted.