ID Clifford 6=8 intake manifold - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bubba327 · 11-23-2010, 01:16 PM

Hey guys here it is-- A Clifford six cylinder intake for your 194 230 250 292 Inline six
Model C-4501 (non heated) intake to install a single 4 barrel on your inline 6
I went looking for one and ended up with two, so I will pass this on along to somebody else
Threads are all good, no cracks or breaks, but PO has done a little light grinding on the lower side on the edge (probably to clear the steering shaft in a super six sprint car)
Still very thick at that spot and should not be a issue. (See bottom picture)
It will need a adapter plate to what ever carburetor you are using and these can be made or purchased from Clifford.
Runners are clean and appears to have had very light use.
First $150 plus shipping takes it. Weight is roughly 7.8 lbs unboxed on a bathroom scale
My zip is 83669 so you can calculate approximate shipping charges.

I know you have been really good this year so buy yourself a early Christmas present!

Name: IMG_2495.jpg
Views: 2749
Size: 28.1 KB

Name: IMG_2495.jpg
Views: 2749
Size: 28.1 KB

Name: IMG_2496.jpg
Views: 1674
Size: 36.5 KB

Name: IMG_2497.jpg
Views: 1650
Size: 44.1 KB

bubba327 · 12-14-2010, 11:35 PM

TTT Last Call
Okay guys, it will be on Ebay, after Christmas

bubba327 · 12-28-2010, 04:02 PM

TTT --update
Sold on E-bay for $264.00

TwoFiftyShifter · 12-28-2010, 07:08 PM

wow you did well.... I don't imagine it goes for much more than that brand new at the 6-cyl speed shops online!

bubba327 · 12-28-2010, 08:42 PM

I could not believe all the interest From Brazil on this item and for other 6 cylinder parts I have listed previously . Parts are hard to find there I guess
happy new year
thanks guys bubba

11-23-2010, 01:16 PM	#1
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Clifford 6=8 intake manifold Hey guys here it is-- A Clifford six cylinder intake for your 194 230 250 292 Inline six Model C-4501 (non heated) intake to install a single 4 barrel on your inline 6 I went looking for one and ended up with two, so I will pass this on along to somebody else Threads are all good, no cracks or breaks, but PO has done a little light grinding on the lower side on the edge (probably to clear the steering shaft in a super six sprint car) Still very thick at that spot and should not be a issue. (See bottom picture) It will need a adapter plate to what ever carburetor you are using and these can be made or purchased from Clifford. Runners are clean and appears to have had very light use. First $150 plus shipping takes it. Weight is roughly 7.8 lbs unboxed on a bathroom scale My zip is 83669 so you can calculate approximate shipping charges. I know you have been really good this year so buy yourself a early Christmas present! __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

12-14-2010, 11:35 PM	#2
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Clifford 6=8 intake manifold TTT Last Call Okay guys, it will be on Ebay, after Christmas __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

12-28-2010, 04:02 PM	#3
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Clifford 6=8 intake manifold TTT --update Sold on E-bay for $264.00 __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

12-28-2010, 07:08 PM	#4
TwoFiftyShifter Registered User Join Date: Nov 2008 Location: Gwinnett GA Posts: 1,803	Re: Clifford 6=8 intake manifold wow you did well.... I don't imagine it goes for much more than that brand new at the 6-cyl speed shops online! __________________ 1982 K10 SWB 1987 V20 - Sold - Doh!

12-28-2010, 08:42 PM	#5
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Clifford 6=8 intake manifold I could not believe all the interest From Brazil on this item and for other 6 cylinder parts I have listed previously . Parts are hard to find there I guess happy new year thanks guys bubba __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.