GMC paul door seals are great! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigsnookmaster · 01-21-2011, 11:54 AM

I have Precision seals on my truck, and my doors are a bit hard to close. If I were to swap out to these, do you think it will make a difference in the closing pressure? Thanks

**GMCPaul** · 01-21-2011, 12:24 PM

Quote:

Originally Posted by bigsnookmaster

I have Precision seals on my truck, and my doors are a bit hard to close. If I were to swap out to these, do you think it will make a difference in the closing pressure? Thanks

If you have Precision glue on door seals and are having difficulty closing the doors I'd suspect that either the ends are butted tight causing the air to be trapped in the seal making door closure hard, or the doors need adjusting at either the hinges or door striker. The doors should close virtually if not exactly the same useing either our Glue on version by Precision or the push on version.
Paul @ GMCPauls

wwotr · 01-31-2011, 01:37 AM

Quote:

Originally Posted by GMCPaul

If you have Precision glue on door seals and are having difficulty closing the doors I'd suspect that either the ends are butted tight causing the air to be trapped in the seal making door closure hard, or the doors need adjusting at either the hinges or door striker. The doors should close virtually if not exactly the same useing either our Glue on version by Precision or the push on version.
Paul @ GMCPauls

Do you need any modification to a stock Truck to make your Weatherstrip described above to fit?
I've got a 72 GMC that is having the Interior redone as I type, and this sounds like the way to go.
LMK..............

**67cheby** · 01-31-2011, 10:57 AM

yes thanks for the pics , makes me glad i bought mine , looks great

**GMCPaul** · 01-31-2011, 03:41 PM

Quote:

Originally Posted by wwotr

Do you need any modification to a stock Truck to make your Weatherstrip described above to fit?

These need no modifications to install.
Paul @ GMCPauls

67C10BUB · 01-31-2011, 02:11 PM

Quote:

Originally Posted by GMCPaul

If you have Precision glue on door seals and are having difficulty closing the doors I'd suspect that either the ends are butted tight causing the air to be trapped in the seal making door closure hard, or the doors need adjusting at either the hinges or door striker. The doors should close virtually if not exactly the same useing either our Glue on version by Precision or the push on version.
Paul @ GMCPauls

Mine are only hard to close with the windows up. If you put the window down it is like butter. Do you guys with door vents have this issue or is it just the models without? I am thinking of adding them if it fixes this issue.

BP68 · 01-29-2011, 08:07 PM

Here are the stock glue on vs GMC Pauls.
First two are stock, last three are the new ones. Doors shut fine.

Name: S4012189.jpg
Views: 2859
Size: 53.6 KB

Name: S4012191.jpg
Views: 2639
Size: 18.0 KB

Name: S4012193.jpg
Views: 2656
Size: 60.2 KB

Name: S4012194.jpg
Views: 2638
Size: 50.6 KB

Name: S4012195.jpg
Views: 2813
Size: 41.8 KB

**GMCPaul** · 04-20-2011, 05:23 PM

Yes Thank You BP68 for the intial post on these I've had the Push On version for a while now and they've been popular with many but I've never been able to get a wide customer review of them after the purchase and you intial post started one.
LOL 67 Cheby, but come on they are Push On door opening weatherstrip just hank those old ones off and put the new ones on then when you need to repair or paint something pull em off and after done just put them back on and you'll seal out all those drafts & road noise. :>)
ledzepp Thanks!! I've heard basicly the same from anyones who's ever used them and I won't use anything else myself I"M GLAD TO BE RID OF THE GLUE and its associated problems!!
Paul @ GMCPauls

VA72C10 · 01-29-2011, 08:56 PM

those look great! Thanks for sharing

DUTCHMAN · 01-30-2011, 04:03 AM

Thanks for the pictures, now I know I've got to order them and get rid of my glue on ones.

BP68 noticed that the middle of the dash is smooth. Do you leave it this way?
Show us some pictures when it's ready.

Valhalla · 01-30-2011, 04:24 AM

good stuff I will be needing these very soon

RCbowtie69 · 01-30-2011, 08:56 PM

SWEEEEET!!!!!!!!!!!!!!!

67C10BUB · 01-30-2011, 10:18 PM

Anyone have issues shutting the doors with the windows up after putting the new weather stripping on? Is this only on the 67 and 68 since they don't have door vents?

BP68 · 04-19-2011, 04:48 PM

Been away for a while. Glad I started this thread. Hope to have my truck on the road soon. Savin up for tires, picked up some wheels, getting bumpers this week. And need to fix a leaky axle seal. Then I hope to start driving around some. Interior is last phase.

**leddzepp** · 04-19-2011, 05:30 PM

took me 10 mins to install. fits like a glove. nice and tight seal. no brainer, a fantastic product.
Posted via Mobile Device

GmtGmt · 04-21-2011, 03:28 PM

what about 73-91 trucks?

**lolife99** · 04-21-2011, 08:12 PM

Ordered a set of the GMCPaul's seals tonight!

Dano69c10 · 04-26-2011, 02:27 PM

subscribed

Lemield · 04-30-2011, 10:29 PM

Received mine yesterday....FAST shipping and these things are AMAZING!!!!
I am really sorry I waited so long to get these seals! They are easy to install and they seal great!

Thanks GMC Paul...you are the man!!!!

litew8 · 09-24-2011, 10:56 AM

Looks great. I know it hasn't been very long since most had installed, just curious if any have actually been in the rain since. Paul, if I were to purchase the 71' cab kit, could you tell me what is not included? Thanks

skoolbusyeller72 · 09-25-2011, 07:09 PM

I finished the interior in my truck today ,glued in new seals and the doors are hard as hell to close sooooooo i just ordered a set and the new glue in ones will hit the trash as soon as the push on set gets here ...

litew8 · 09-29-2011, 02:36 AM

anyone?

aventur1 · 01-27-2012, 11:14 AM

Just ordered a set this morning...can't wait to install them! Thanks GMC Paul
Recieved my door seals and installed them, they went on great, the only problem that I would like to mention is on a tight corner while pushing them on to fit tight the metal popped through the rubber, small area but still exposed the internal metal. Other than that they are great. Mines a weekly driver, so all is good.

aventur1 · 02-22-2012, 04:21 PM

I bought these kits, liked all of it and fit was good. The only thing I did was cut my outside window seal to short, I did not consider going past the wing division bar another 1/4 inch to seal that little area.

aventur1 · 03-12-2012, 10:54 PM

jtp67-72
I would say just go slow and make sure it's tight push hard down to set as you go around that part keep the loose end pushing towards the part your pressing in the slot. The edges will seem so curl up as you go around corner so I used a very small screw driver to pull the lip up over the edge. Kinda hard to explain and the small loop wire inside the edgeing will tend to poke through, I just used the scew driver to lift edge and the wire will go back into the seal. You can use maybe stiff plastic so not to damage paint. It will be a little kinked at the 45 degree but as you shut the door it smooths out.
When you get to the end I cut it a little long then cut the bottom and used the extra rubber on top to tuck into where you began.

01-21-2011, 11:54 AM	#1
bigsnookmaster Registered User Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,267	Re: GMC paul door seals are great! I have Precision seals on my truck, and my doors are a bit hard to close. If I were to swap out to these, do you think it will make a difference in the closing pressure? Thanks __________________ greg http://community.webshots.com/user/68406Stepside

01-31-2011, 10:57 AM	#4
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: GMC paul door seals are great! yes thanks for the pics , makes me glad i bought mine , looks great __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-29-2011, 08:07 PM	#7
BP68 Registered User Join Date: Jun 2006 Location: Olive Branch, MS Posts: 824	Re: GMC paul door seals are great! Here are the stock glue on vs GMC Pauls. First two are stock, last three are the new ones. Doors shut fine. __________________ 68 C10 Shortbed Fleetside 06 Chevy Ext Cab Fleetside 03 Grand Prix GTP My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=269999

04-20-2011, 05:23 PM	#8
GMCPaul Senior Member Join Date: Mar 2000 Location: Rockville,In. USA Posts: 3,721	Re: GMC paul door seals are great! Yes Thank You BP68 for the intial post on these I've had the Push On version for a while now and they've been popular with many but I've never been able to get a wide customer review of them after the purchase and you intial post started one. LOL 67 Cheby, but come on they are Push On door opening weatherstrip just hank those old ones off and put the new ones on then when you need to repair or paint something pull em off and after done just put them back on and you'll seal out all those drafts & road noise. :>) ledzepp Thanks!! I've heard basicly the same from anyones who's ever used them and I won't use anything else myself I"M GLAD TO BE RID OF THE GLUE and its associated problems!! Paul @ GMCPauls __________________ Secure Online Catalog for-GMCPauls Truck Parts Email- GMCPAULS@GMAIL.COM

01-29-2011, 08:56 PM	#9
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: GMC paul door seals are great! those look great! Thanks for sharing __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-30-2011, 04:03 AM	#10
DUTCHMAN Registered User Join Date: Dec 1999 Location: the Netherlands Posts: 363	Re: GMC paul door seals are great! Thanks for the pictures, now I know I've got to order them and get rid of my glue on ones. BP68 noticed that the middle of the dash is smooth. Do you leave it this way? Show us some pictures when it's ready. __________________ 06 BMW 330d aut touring full option 83 Jeep CJ7 360 aut sold 71 GMC Suburban 67 Chevrolet C10 stepside 54 Ford F100 sold 49 Chevrolet coe 48 Ford f6 coe Strijen the Netherlands "NO MISTAKES NO PROGRESS"

01-30-2011, 04:24 AM	#11
Valhalla Registered User Join Date: Nov 2010 Location: Chandler, Arizona Posts: 295	Re: GMC paul door seals are great! good stuff I will be needing these very soon __________________ My build thread for Project TiC TaC/Jazzmin Oh Yeahhh Cheap work is never good and good work is never cheap. Lesson = learn to do it all the right way on your own. SqueegeeMan

01-30-2011, 08:56 PM	#12
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: GMC paul door seals are great! SWEEEEET!!!!!!!!!!!!!!!

01-30-2011, 10:18 PM	#13
67C10BUB Registered User Join Date: Aug 2010 Location: Alta Loma, CA Posts: 610	Re: GMC paul door seals are great! Anyone have issues shutting the doors with the windows up after putting the new weather stripping on? Is this only on the 67 and 68 since they don't have door vents? __________________ 67 5.3L Build

04-19-2011, 04:48 PM	#14
BP68 Registered User Join Date: Jun 2006 Location: Olive Branch, MS Posts: 824	Re: GMC paul door seals are great! Been away for a while. Glad I started this thread. Hope to have my truck on the road soon. Savin up for tires, picked up some wheels, getting bumpers this week. And need to fix a leaky axle seal. Then I hope to start driving around some. Interior is last phase. __________________ 68 C10 Shortbed Fleetside 06 Chevy Ext Cab Fleetside 03 Grand Prix GTP My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=269999 Last edited by BP68; 04-19-2011 at 04:49 PM.

04-19-2011, 05:30 PM	#15
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: GMC paul door seals are great! took me 10 mins to install. fits like a glove. nice and tight seal. no brainer, a fantastic product. Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

04-21-2011, 08:12 PM	#17
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: GMC paul door seals are great! Ordered a set of the GMCPaul's seals tonight! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

04-26-2011, 02:27 PM	#18
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: GMC paul door seals are great! subscribed __________________ '69 Fleet It ain't yours, if you didn't build it!

04-30-2011, 10:29 PM	#19
Lemield Registered User Join Date: Dec 2004 Location: Arvada Colorado Posts: 1,321	Re: GMC paul door seals are great! Received mine yesterday....FAST shipping and these things are AMAZING!!!! I am really sorry I waited so long to get these seals! They are easy to install and they seal great! Thanks GMC Paul...you are the man!!!! __________________ Larry 1949 Willys CJ2A, Kubota Turbo Diesel engine, Warn Overdrive, 11 inch brakes, 12volt, Warn M8000 Winch "Little Green" 1970 Rustoleum Roller Red C20 Custom Camper 454 TH400 "Big Red" 1971 K20 6.2 Turbo Diesel 4x4 4spd Ranger Overdrive "Pumpkin Wagon" 2005 VW Beetle Diesel 44+ MPG "Silver Bullet"

09-24-2011, 10:56 AM	#20
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: GMC paul door seals are great! Looks great. I know it hasn't been very long since most had installed, just curious if any have actually been in the rain since. Paul, if I were to purchase the 71' cab kit, could you tell me what is not included? Thanks __________________ project: "my happy mess"



Register or Log In To remove these advertisements.

09-25-2011, 07:09 PM	#21
skoolbusyeller72 Registered User Join Date: Feb 2011 Location: Ocean Springs ,Ms Posts: 43	Re: GMC paul door seals are great! I finished the interior in my truck today ,glued in new seals and the doors are hard as hell to close sooooooo i just ordered a set and the new glue in ones will hit the trash as soon as the push on set gets here ... __________________ 1972 Custom 10 LWB 1973 V8 Vega wagon 1925 Model T Wrecker 1913 Model T Speedster http://s181.photobucket.com/albums/x...07/72skoolbus/

09-29-2011, 02:36 AM	#22
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: GMC paul door seals are great! anyone? __________________ project: "my happy mess"

01-27-2012, 11:14 AM	#23
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: GMC paul door seals are great! Just ordered a set this morning...can't wait to install them! Thanks GMC Paul Recieved my door seals and installed them, they went on great, the only problem that I would like to mention is on a tight corner while pushing them on to fit tight the metal popped through the rubber, small area but still exposed the internal metal. Other than that they are great. Mines a weekly driver, so all is good. __________________ 1968 4x4 Frame, with a 67 Cab and Bed A Shorter Step 1999 Dodge 2500 Cummins Diesel Last edited by aventur1; 02-14-2012 at 11:10 AM.

02-22-2012, 04:21 PM	#24
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: GMC paul door seals are great! I bought these kits, liked all of it and fit was good. The only thing I did was cut my outside window seal to short, I did not consider going past the wing division bar another 1/4 inch to seal that little area. __________________ 1968 4x4 Frame, with a 67 Cab and Bed A Shorter Step 1999 Dodge 2500 Cummins Diesel

03-12-2012, 10:54 PM	#25
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: GMC paul door seals are great! jtp67-72 I would say just go slow and make sure it's tight push hard down to set as you go around that part keep the loose end pushing towards the part your pressing in the slot. The edges will seem so curl up as you go around corner so I used a very small screw driver to pull the lip up over the edge. Kinda hard to explain and the small loop wire inside the edgeing will tend to poke through, I just used the scew driver to lift edge and the wire will go back into the seal. You can use maybe stiff plastic so not to damage paint. It will be a little kinked at the 45 degree but as you shut the door it smooths out. When you get to the end I cut it a little long then cut the bottom and used the extra rubber on top to tuck into where you began. __________________ 1968 4x4 Frame, with a 67 Cab and Bed A Shorter Step 1999 Dodge 2500 Cummins Diesel

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.