Front Suspension "kit" for 1 ton?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tow guys · 01-14-2011, 06:10 PM

We're getting ready to pull the front suspension apart on our 70 GMC 1 ton and was wondering if any or all of the parts from the 1/2 ton kit is the same as our 1 ton truck? I can't seem to find any kits for the 1 ton and some of the parts do seem to carry the same part #.
Any help would be most appreciated.
Thanks,
Tony

AVS_JASON · 01-14-2011, 07:20 PM

Everything should be the same. Only thing I would maybe change is the size/thickness of the bags.

jimmydean · 01-14-2011, 07:24 PM

Depends on what you mean by "kit". As Jason said, I would use a Slam 8" front bag, but the plates and cup are the same on my C20 as my C10 was.

I know there are frame differences, but if you are just swapping the coils for bags, then it's the same gear.

**lolife99** · 01-14-2011, 08:54 PM

Quote:

Originally Posted by tow guys

We're getting ready to pull the front suspension apart on our 70 GMC 1 ton and was wondering if any or all of the parts from the 1/2 ton kit is the same as our 1 ton truck? I can't seem to find any kits for the 1 ton and some of the parts do seem to carry the same part #.
Any help would be most appreciated.
Thanks,
Tony

Are you talking air ride kits or rebuild kits?
(as in bushings, balljoints, and tie rod ends)

tow guys · 01-14-2011, 09:04 PM

I was referring to rebuild kit as in ball joints etc. This is a tow truck so air suspension is probably out of the question
Posted via Mobile Device

**lolife99** · 01-14-2011, 09:15 PM

I assume your truck is still has drum brakes up front.
Most auto parts stores have the parts, or should be able to order them.
(alot of 67-72 parts aren't "in stock",... because there's not much demand for them)
The lower balljoints are definitely bigger on the 3/4 and 1-ton trucks because the hole in the lower a-arm is larger than the 1/2 ton version.
Tie rods should also be bigger.

If you can't find parts locally,... I would look at Early Classic Enterprises. (ECE)
www.earlyclassic.com.

tow guys · 01-14-2011, 11:11 PM

Are the 1 ton parts the same as the 3/4 ton trucks? I can't seem to find any front end parts listed for 1 ton, just 1/2 or 3/4. Very confused.....
Posted via Mobile Device

**lolife99** · 01-14-2011, 11:38 PM

I would shop for 3/4-ton parts.
The 73-87 3/4-ton and 1-ton parts share balljoint and tie rod part numbers.
I assume the older 67-72 C20 and C30 truck would also.

Maybe someone else can add some info?

72MARIO · 01-15-2011, 09:29 AM

I am pretty sure the ball joints and tie rods are the same. Not sure on the controll arm shafts.

01-14-2011, 06:10 PM	#1
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Front Suspension "kit" for 1 ton?? We're getting ready to pull the front suspension apart on our 70 GMC 1 ton and was wondering if any or all of the parts from the 1/2 ton kit is the same as our 1 ton truck? I can't seem to find any kits for the 1 ton and some of the parts do seem to carry the same part #. Any help would be most appreciated. Thanks, Tony

01-14-2011, 07:20 PM	#2
AVS_JASON AIRBAGPARTS.COM Join Date: Dec 2008 Location: CEN CAL Posts: 520	Re: Front Suspension "kit" for 1 ton?? Everything should be the same. Only thing I would maybe change is the size/thickness of the bags.

01-14-2011, 07:24 PM	#3
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Front Suspension "kit" for 1 ton?? Depends on what you mean by "kit". As Jason said, I would use a Slam 8" front bag, but the plates and cup are the same on my C20 as my C10 was. I know there are frame differences, but if you are just swapping the coils for bags, then it's the same gear. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

01-14-2011, 09:04 PM	#5
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: Front Suspension "kit" for 1 ton?? I was referring to rebuild kit as in ball joints etc. This is a tow truck so air suspension is probably out of the question Posted via Mobile Device

01-14-2011, 09:15 PM	#6
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Front Suspension "kit" for 1 ton?? I assume your truck is still has drum brakes up front. Most auto parts stores have the parts, or should be able to order them. (alot of 67-72 parts aren't "in stock",... because there's not much demand for them) The lower balljoints are definitely bigger on the 3/4 and 1-ton trucks because the hole in the lower a-arm is larger than the 1/2 ton version. Tie rods should also be bigger. If you can't find parts locally,... I would look at Early Classic Enterprises. (ECE) www.earlyclassic.com. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 01-14-2011 at 11:34 PM.

01-14-2011, 11:11 PM	#7
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: Front Suspension "kit" for 1 ton?? Are the 1 ton parts the same as the 3/4 ton trucks? I can't seem to find any front end parts listed for 1 ton, just 1/2 or 3/4. Very confused..... Posted via Mobile Device

01-14-2011, 11:38 PM	#8
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Front Suspension "kit" for 1 ton?? I would shop for 3/4-ton parts. The 73-87 3/4-ton and 1-ton parts share balljoint and tie rod part numbers. I assume the older 67-72 C20 and C30 truck would also. Maybe someone else can add some info? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-15-2011, 09:29 AM	#9
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	Re: Front Suspension "kit" for 1 ton?? I am pretty sure the ball joints and tie rods are the same. Not sure on the controll arm shafts. __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.