Power steering pump mounting - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**john** · 01-20-2011, 05:42 PM

I dont have a pic, but you are missing an "L" shaped bracket from end exhaust manifold bolt to the adj. bracket shown to fasten to.

JimKshortstep4x4 · 01-20-2011, 08:27 PM

Here is a picture. As John mentioned you are missing the bracket that the adjuster bolts to.

Jim

glider_6969 · 01-21-2011, 11:32 AM

Quote:

Originally Posted by JimKshortstep4x4

Here is a picture. As John mentioned you are missing the bracket that the adjuster bolts to.

Jim

Hey Jim,

that's exactly what I was looking for, I knew I could count on you guys. It should be easy enough to find. I just may have to add a spacer, since I have headers on it .

Thanks again,,

01-20-2011, 05:42 PM	#1
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: Power steering pump mounting I dont have a pic, but you are missing an "L" shaped bracket from end exhaust manifold bolt to the adj. bracket shown to fasten to. __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

01-20-2011, 08:27 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Power steering pump mounting Here is a picture. As John mentioned you are missing the bracket that the adjuster bolts to. Jim Attached Images __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.