Anyone bolt in notch?

[72gmcshorty]

Has anyone done a bolt in c-notch on a 72 2wd blazer? If so, which brand did you use? any issues with the rear frame horns?

[SOON2BLAZE]

Never done it, but I believe any of the 67-72 truck bolt in ones would work.

[YBNORML]

I used the cpp version. It bolted in with no issues.
Posted via Mobile Device

[OG2wdblaze]

considering the same thing...would love to see pics of total drop with bolt in and installation pics if possible.

[tubbedII]

I mine a few weeks ago, nothing too bad except for stubborn rivets. I used CPP's, and as long as you have a true 2wd frame with coils, it should bolt in like any other truck. I liked CPP's since it' referenced off exisiting holes to make the cuts easier to determine where they should be.

I didn't take any pics of it, but I used this link from Rokcrln as a guide: http://67-72chevytrucks.com/vboard/s...d.php?t=195566

OG2wdblaze: I had a 4/6 drop on mine without a notch and I only bottomed out a few times. The pic is with 22's and about a 31" tire. I'm still in the middle of bagging it, and with a 2" block, bags and c-notch, the rear tucks tires with no air.

[SeventyOne]

This is coming from a 4x4 guy - that is one nice looking Blazer

[OG2wdblaze]

wow, I need to do some more research...Im not sure that is much lower than what Im sitting at now. Thoughts?

[tubbedII]

Originally Posted by SeventyOne

This is coming from a 4x4 guy - that is one nice looking Blazer

Thanks!

Originally Posted by OG2wdblaze

wow, I need to do some more research...Im not sure that is much lower than what Im sitting at now. Thoughts?

I think you're at about stock height. My avatar is the sake 4/6 drop, but with shorter tires. The 22's raised it up some.
Posted via Mobile Device