buckets to bench

[low_84_inchaska]

i have buckets out of a 91 burb,,,i am looking to get a bench seat....i like the look more...

what benches have you all put in these trucks?

the winter is at the halfway point here in the great white north and it is time to crank up the truck project again.


thanks!!

[Jonboy]

I have a bench from a 88-94 truck in mine. It's thinner than the stock bench, so it goes back a little further. It was in a parts truck I had, but it looks like they just put in a block of steel tubing to make the adapter.

[bigd65]

I have been trying to find one of those seats. Hard to find

[dropd80s]

I had the same 88-94 bench in my 84 K5, and it was not long enough. It was close but seemed like when you centered it (from side to side) it felt as though you sat to the right of the steering wheel. Some might not notice, but I didn't likle it.

[low_84_inchaska]

if i can find a bench from a 73-87 it will work right...? i will just hogring a new cover on it assuming the foam is decent.

[Jonboy]

I think the 81-up seats may be a little thinner, but any 73-87 bench should bolt right in.

[canadian 4x4]

suburbans have a flat floor where the pickup blazer have the hump floor so you will have to modify the bracket for those to work in you burb.

[Jonboy]

Originally Posted by canadian 4x4

suburbans have a flat floor where the pickup blazer have the hump floor so you will have to modify the bracket for those to work in you burb.

Not quite. The Blazer has the flat floor; the Suburban has the humps similar to a pickup or crew cab.

[canadian 4x4]

yea i wondered about that after i posted it

[texasfunk]

But he's looking to put a bench back...so a swap should be straight forward. Save those inner bucket brackets!
Posted via Mobile Device