Bagged 60-62 trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

62 Bowtie · 03-24-2010, 01:02 AM

got any pics of your exaust I'm only runnin 2&1/2 dropped spindles and cranked torsion bars in front and 5" coils at the rear, and thats enough to scrape my exaust on speed bumps. How much will I gain if I remove the torsion setup and go with a later setup thanks for any help!

Ghostwhite · 02-15-2011, 10:07 PM

I am slowly moving toward bagging and dropping my truck with the current frame, I had been searching for a different frame as I know too well it is rather difficult on ours but haven't found many good candidates in the 63-72 years locally. How did you do the rear on your truck?

03-24-2010, 01:02 AM	#1
62 Bowtie Registered User Join Date: Nov 2008 Location: Elk Grove Ca Posts: 629	Bagged 60-62 trucks got any pics of your exaust I'm only runnin 2&1/2 dropped spindles and cranked torsion bars in front and 5" coils at the rear, and thats enough to scrape my exaust on speed bumps. How much will I gain if I remove the torsion setup and go with a later setup thanks for any help!

02-15-2011, 10:07 PM	#2
Ghostwhite Squarebody guy Join Date: Apr 2009 Location: Minnesota Posts: 335	Re: Bagged 60-62 trucks I am slowly moving toward bagging and dropping my truck with the current frame, I had been searching for a different frame as I know too well it is rather difficult on ours but haven't found many good candidates in the 63-72 years locally. How did you do the rear on your truck?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.