TX I'm parting out an 87 SWB in DFW Texas - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blackbeaSSt · 03-08-2011, 05:07 PM

i'll pass on the emblems. pic of the kick panels? looks to be the color i need but just want to make sure

SIDS65 · 03-08-2011, 07:01 PM

I will take the shift bracket and pieces. Let me know how you want paid. Wont need the long rod. I can lengthen mine if need be. Let me know. Thanks Spencer

Tx Firefighter · 03-08-2011, 08:28 PM

Quote:

Originally Posted by blackbeaSSt

i'll pass on the emblems. pic of the kick panels? looks to be the color i need but just want to make sure

Here are pictures of the kick panels. It was getting dark so I had to use the flash on the camera.

Tx Firefighter · 03-08-2011, 08:30 PM

Quote:

Originally Posted by SIDS65

I will take the shift bracket and pieces. Let me know how you want paid. Wont need the long rod. I can lengthen mine if need be. Let me know. Thanks Spencer

Spencer,

I will send you a private message with my information

Tx Firefighter · 03-08-2011, 08:31 PM

Quote:

Originally Posted by bnb0221

wat about the duel tank set up

Like I said in the original post, I am keeping the tanks for the fuel injection swap on my truck.

blackbeaSSt · 03-08-2011, 09:19 PM

ok 1 more question. on the passenger side kick is that discoloration below the speaker cleanable?

also maybe someone can chime in on this, but will those 87 kick panels fit an 82? i might be asking for nothing if they don't

Tx Firefighter · 03-08-2011, 09:37 PM

I'll clean them up Thursday and see what they look like. I'm working a 24 hour shift tomorrow.

Jonboy · 03-09-2011, 09:27 AM

The kick panels will work fine on your '82.

blackbeaSSt · 03-09-2011, 10:58 AM

^^ thanks jonboy!

trevrolet65 · 03-09-2011, 11:10 AM

Thanks for the reply on the cab. I had to think about it a couple of days. I'll pass because of fuel injected year. Let me know what parts your after, cause I have a few for injection, manifolds ect. What year is your project, I might know some parts for it too. Thanks so much.

Jonboy · 03-09-2011, 11:21 AM

The fuel injection won't affect the cab, there is just a spot on the firewall that has a grommet pass through for wires. Everything else is the same.

trevrolet65 · 03-09-2011, 11:28 AM

Yeah but it will affect the inspection aspect. I was only gonna build to sell, but I can't pass a headach on to someone else, (can't get inspected, have to buy a sticker, yuck). Thanks anyway.

hlp-3 · 03-09-2011, 02:31 PM

I would be interested in the core support and lower valance if rust free and undamaged.

hlp-3 · 03-09-2011, 02:40 PM

Quote:

Originally Posted by hlp-3

I would be interested in the core support and lower valance if rust free and undamaged.

Sorry, that is if your not keeping it.

78K20 · 03-09-2011, 11:19 PM

How much for the passenger door (if no rust, or dents)
shipped to 46350 ?

Tx Firefighter · 03-10-2011, 12:20 PM

Quote:

Originally Posted by SIDS65

I will take the shift bracket and pieces. Let me know how you want paid. Wont need the long rod. I can lengthen mine if need be. Let me know. Thanks Spencer

Spencer,

I shipped the linkage today via Priority Mail to your PO box address. You should have it in 2-3 days. Thank you very much.

HarleyHauler · 03-12-2011, 02:07 AM

How much for the power window switches and power door lock switches?

trevrolet65 · 03-12-2011, 10:21 AM

I hope your not out there fighting those wild fires, and if you are,stay safe and thank you.

yellow70 · 03-13-2011, 08:26 PM

have you got pics of the steering wheel, how much shipped to 72543

Tx Firefighter · 03-13-2011, 10:20 PM

I appreciate everyone's interest and business. I sold some big stuff on Craigslist and all that's left is the parts I kept and scrap metal.

03-08-2011, 05:07 PM	#26
blackbeaSSt Registered User Join Date: Sep 2010 Location: Anderson, SC Posts: 325	Re: I'm parting out an 87 SWB in DFW Texas i'll pass on the emblems. pic of the kick panels? looks to be the color i need but just want to make sure

03-08-2011, 07:01 PM	#27
SIDS65 Registered User Join Date: Jan 2007 Location: Kincaid IL Posts: 26	Re: I'm parting out an 87 SWB in DFW Texas I will take the shift bracket and pieces. Let me know how you want paid. Wont need the long rod. I can lengthen mine if need be. Let me know. Thanks Spencer

03-08-2011, 09:19 PM	#31
blackbeaSSt Registered User Join Date: Sep 2010 Location: Anderson, SC Posts: 325	Re: I'm parting out an 87 SWB in DFW Texas ok 1 more question. on the passenger side kick is that discoloration below the speaker cleanable? also maybe someone can chime in on this, but will those 87 kick panels fit an 82? i might be asking for nothing if they don't

03-08-2011, 09:37 PM	#32
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: I'm parting out an 87 SWB in DFW Texas I'll clean them up Thursday and see what they look like. I'm working a 24 hour shift tomorrow. __________________ I'm on the Instagram- @Gearhead_Kevin

03-09-2011, 09:27 AM	#33
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: I'm parting out an 87 SWB in DFW Texas The kick panels will work fine on your '82. __________________ 1974 Jimmy- 5.3/4L80e/NP241

03-09-2011, 10:58 AM	#34
blackbeaSSt Registered User Join Date: Sep 2010 Location: Anderson, SC Posts: 325	Re: I'm parting out an 87 SWB in DFW Texas ^^ thanks jonboy!

03-09-2011, 11:10 AM	#35
trevrolet65 Registered User Join Date: Nov 2010 Location: Venus Texas Posts: 217	Re: I'm parting out an 87 SWB in DFW Texas Thanks for the reply on the cab. I had to think about it a couple of days. I'll pass because of fuel injected year. Let me know what parts your after, cause I have a few for injection, manifolds ect. What year is your project, I might know some parts for it too. Thanks so much.

03-09-2011, 11:21 AM	#36
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: I'm parting out an 87 SWB in DFW Texas The fuel injection won't affect the cab, there is just a spot on the firewall that has a grommet pass through for wires. Everything else is the same. __________________ 1974 Jimmy- 5.3/4L80e/NP241

03-09-2011, 11:28 AM	#37
trevrolet65 Registered User Join Date: Nov 2010 Location: Venus Texas Posts: 217	Re: I'm parting out an 87 SWB in DFW Texas Yeah but it will affect the inspection aspect. I was only gonna build to sell, but I can't pass a headach on to someone else, (can't get inspected, have to buy a sticker, yuck). Thanks anyway.

03-09-2011, 02:31 PM	#38
hlp-3 Registered User Join Date: Nov 2009 Location: Dallas, Texas Posts: 64	Re: I'm parting out an 87 SWB in DFW Texas I would be interested in the core support and lower valance if rust free and undamaged. __________________ ________________ 2007 Trailblazer SS 1996 Corvette (sold) 1987 Silverado LWB (R20) 1985 Silverado SWB (C10) 1973 Nova SS 1965 Chevy C-10 SWB (sold)

03-09-2011, 11:19 PM	#40
78K20 Registered User Join Date: Apr 2005 Location: LaPorte, Indiana Posts: 109	Re: I'm parting out an 87 SWB in DFW Texas How much for the passenger door (if no rust, or dents) shipped to 46350 ? __________________ 78K20 350 / 400TH 3:73's, Dual Polly tanks, my old plow Trk. Now parting out. 84K20 6.2 "J" Code Diesel / 700R / 4:10's 78K20 454/400TH 3:73's Dual tanks (my new plow rig)

03-12-2011, 02:07 AM	#42
HarleyHauler Registered User Join Date: Jan 2011 Location: Mesa AZ Posts: 60	Re: I'm parting out an 87 SWB in DFW Texas How much for the power window switches and power door lock switches?

03-12-2011, 10:21 AM	#43
trevrolet65 Registered User Join Date: Nov 2010 Location: Venus Texas Posts: 217	Re: I'm parting out an 87 SWB in DFW Texas I hope your not out there fighting those wild fires, and if you are,stay safe and thank you.

03-13-2011, 08:26 PM	#44
yellow70 Registered User Join Date: Mar 2006 Location: Heber Springs Arkansas Posts: 117	Re: I'm parting out an 87 SWB in DFW Texas have you got pics of the steering wheel, how much shipped to 72543

03-13-2011, 10:20 PM	#45
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: I'm parting out an 87 SWB in DFW Texas I appreciate everyone's interest and business. I sold some big stuff on Craigslist and all that's left is the parts I kept and scrap metal. __________________ I'm on the Instagram- @Gearhead_Kevin



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.