Got some new stuff..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hotrod70C10 · 07-11-2003, 05:19 PM

I got some new stuff for my truck recently. This thing runs a lot better now! got a new hei distributor, performer intake, another new waterpump ( cheapo warranty), and a new set of BF Goodrich Radial T/A's 2 255/60/15 and 2 275/60/15's. I have decided to order the six lug disc and 2.5 inch lowering spindle kit. before I order the kit does anyone know who has the best price and is there anything else I need that doesn't come in the kit.
oh, my vacum advance wasn't working on my old hei and it the timing was backed way way way down. lol that's the best thing I have done to my truck yet! I can leave a peg legged mark all the way through first now by mashing the go pedal.

krue · 07-11-2003, 05:23 PM

Sounds like you are having some fun!

Longhorn Man · 07-11-2003, 05:27 PM

Quote:

I can leave a peg legged mark all the way through first now by mashing the go pedal.

Happy marks rule!

Hotrod70C10 · 07-11-2003, 06:02 PM

lol...yeah...too bad it won't lay down two marks side by side. (yet) lol.

Longhorn Man · 07-11-2003, 06:22 PM

Just back up and move over a couple feet.

stelth2002 · 07-11-2003, 07:25 PM

Hot rod, i am getting some new tires for my truck... very simialar to yours. I plan on getting the 285/70/15's for the back and 255/70/15... Will those 285s fit on the back??? has anyone tried it out?

Hotrod70C10 · 07-11-2003, 07:36 PM

LOL longhorn! I didn't think of that....
stelth, I don't know about the 285's but, I do have 255/70/15's all around on my 8 inch rallies and I didn't think they would work with a 4 - 4 1/2 front drop since I am going to be dropping the front down another 2 - 2 1/2 inches with the disc brake kit. I'll be mounting and balancing them at my dad's shop tomorrow so, I will get a few pics.

stelth2002 · 07-11-2003, 10:07 PM

I dont have a drop on it now and dont see it in the future really either. does anyone run a 285 on there truck that would know here???? even a 4x4 that isnt lifted should be able to tell if it will work... i dont think i will bottom out, its going to hit the inside of my bed with the rallies if it hits anything

Longhorn Man · 07-12-2003, 12:13 AM

You may well have problems there.
I know with my 275/60s I have one tire that rubs the fender well just a bit. (can't remember which one does it) Keep in mind my truck gettin pretty worn and the bushings are probably all rotted out back there by now.
I have no idea what back spacing I have, but the rims are just shy of 10 inches wide though.

Project1970 · 07-12-2003, 12:59 AM

I've gotta pimp the ECE 6-lug disc kit, just because it's what's on my '70

What do you -need- that's not included? With the ECE kit...nothing, really. There's plenty of things that are good to add on (say, balljoints and tie-rod ends) but the kit itself is very complete.

Hotrod70C10 · 07-12-2003, 09:45 AM

Thanks for the heads up longhornmail, I do have a new set of trailing arm bushings to install, I just don't have a big enough bar or strong enough impact to break the bolts loose! If i run into problems I will install those damn bushings. thanks man.

07-11-2003, 05:19 PM	#1
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	Got some new stuff..... I got some new stuff for my truck recently. This thing runs a lot better now! got a new hei distributor, performer intake, another new waterpump ( cheapo warranty), and a new set of BF Goodrich Radial T/A's 2 255/60/15 and 2 275/60/15's. I have decided to order the six lug disc and 2.5 inch lowering spindle kit. before I order the kit does anyone know who has the best price and is there anything else I need that doesn't come in the kit. oh, my vacum advance wasn't working on my old hei and it the timing was backed way way way down. lol that's the best thing I have done to my truck yet! I can leave a peg legged mark all the way through first now by mashing the go pedal. __________________ 70' C-10 LWB Fleetside 4.5/6 drop

07-11-2003, 05:23 PM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Sounds like you are having some fun! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

07-11-2003, 06:02 PM	#4
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	lol...yeah...too bad it won't lay down two marks side by side. (yet) lol. __________________ 70' C-10 LWB Fleetside 4.5/6 drop

07-11-2003, 07:25 PM	#6
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Hot rod, i am getting some new tires for my truck... very simialar to yours. I plan on getting the 285/70/15's for the back and 255/70/15... Will those 285s fit on the back??? has anyone tried it out? __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

07-11-2003, 07:36 PM	#7
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	LOL longhorn! I didn't think of that.... stelth, I don't know about the 285's but, I do have 255/70/15's all around on my 8 inch rallies and I didn't think they would work with a 4 - 4 1/2 front drop since I am going to be dropping the front down another 2 - 2 1/2 inches with the disc brake kit. I'll be mounting and balancing them at my dad's shop tomorrow so, I will get a few pics. __________________ 70' C-10 LWB Fleetside 4.5/6 drop

07-11-2003, 06:22 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Just back up and move over a couple feet.

07-11-2003, 10:07 PM	#8
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	I dont have a drop on it now and dont see it in the future really either. does anyone run a 285 on there truck that would know here???? even a 4x4 that isnt lifted should be able to tell if it will work... i dont think i will bottom out, its going to hit the inside of my bed with the rallies if it hits anything __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

07-12-2003, 12:13 AM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	You may well have problems there. I know with my 275/60s I have one tire that rubs the fender well just a bit. (can't remember which one does it) Keep in mind my truck gettin pretty worn and the bushings are probably all rotted out back there by now. I have no idea what back spacing I have, but the rims are just shy of 10 inches wide though.

07-12-2003, 12:59 AM	#10
Project1970 14.1 @ 96MPH Join Date: Jul 2001 Location: Mesa, AZ Posts: 2,811	I've gotta pimp the ECE 6-lug disc kit, just because it's what's on my '70 What do you -need- that's not included? With the ECE kit...nothing, really. There's plenty of things that are good to add on (say, balljoints and tie-rod ends) but the kit itself is very complete. __________________ Project1970 - LS1 Swap Complete!

07-12-2003, 09:45 AM	#11
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	Thanks for the heads up longhornmail, I do have a new set of trailing arm bushings to install, I just don't have a big enough bar or strong enough impact to break the bolts loose! If i run into problems I will install those damn bushings. thanks man. __________________ 70' C-10 LWB Fleetside 4.5/6 drop

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.