billet interior - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lbbdoc · 07-08-2003, 01:02 AM

does anyone know where i can find billet inserts for the interior (like around the gauges and the air conditioner vents)?

Prerunner1982 · 07-08-2003, 02:03 AM

welcome, from a native Texan.. (lubbock to be exact)... look up ocbaud he has them...

78SilveradoSWB · 07-08-2003, 02:48 AM

Welcome to the board!

Both LMC & Chevy Duty have them in their respective catalogs. Check Swervin's site too.

http://www.73-87.com/

lbbdoc · 07-08-2003, 02:36 PM

thanks alot for welcoming me and for the info and so ther is no confusion im "docs" son and its my truck but he bought it for me thanks again.

apstguy · 07-08-2003, 04:45 PM

You can also get them at trucks & vans - anyone have the URL? I'm not at home. Alot of members went there for billet.

**swervin ervin** · 07-08-2003, 05:03 PM

http://www.trucknvans.com/billetacc/

This is where I bought mine.

lbbdoc · 07-08-2003, 05:08 PM

mike how much was yours and how hard was it to instal?

**swervin ervin** · 07-08-2003, 05:12 PM

All of my billet is polished, but they also have brushed too.

I got the instrument bezel, dash insert, and both door inserts, without pull straps covers. All total, shipping and all it was $207.40.

**swervin ervin** · 07-08-2003, 05:13 PM

Oh, on the install, not bad. You just screw them over the top of the stock stuff.

lbbdoc · 07-08-2003, 05:18 PM

thanks alot for the info your truck is nice it looks alot like mine

kballan · 07-08-2003, 05:44 PM

Quote:

Both LMC & Chevy Duty have them in their respective catalogs.

I got mine from Classic Industries - www.classicindustries.com The billet for my instrument cluster was $99.95. The billet for the dash pad (above the glove box) was about $45, and the billet door inserts were about $50 for the pair. had them all in about 3 days! I know for a fact that the prices are cheaper than LMC, and I believe that they're cheaper than Chevy Duty.

84Stepper · 07-08-2003, 06:13 PM

Thats alot cheaper than I thought it would be. I bought the brushed aluminum piece for the dash for 60$. Im going to switch to polished I like it much better.

lbbdoc · 07-08-2003, 07:14 PM

thanks ill look at all the sites and prices

gchemist · 07-08-2003, 07:14 PM

Hey, stock stuff looks good sometimes too.

lbbdoc · 07-08-2003, 08:32 PM

yea it does but my stock stuff has little white spots on it.

cochino12 · 07-08-2003, 08:37 PM

Quote:

Originally posted by gchemist
Hey, stock stuff looks good sometimes too.

Yours does look nice

lbbdoc · 07-08-2003, 08:47 PM

Adam your truck looks sweet what mods do you have
-lbbdoc-

boataddict26 · 07-08-2003, 10:03 PM

Does everyone agree that Classic Industries has good prices? I compare all the prices of the big companies, but there are alot of other ones out there that I dont know about that may be better.

allthrtl · 07-08-2003, 11:54 PM

Cool, another Lubbockite.......welcome to the board lbbdoc...

cochino12 · 07-12-2003, 11:45 AM

any pics of both finishes?

07-08-2003, 01:02 AM	#1
lbbdoc Registered User Join Date: Jul 2003 Location: Lubbock, TX Posts: 113	billet interior does anyone know where i can find billet inserts for the interior (like around the gauges and the air conditioner vents)? Last edited by lbbdoc; 07-08-2003 at 01:55 AM.

07-08-2003, 02:03 AM	#2
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	welcome, from a native Texan.. (lubbock to be exact)... look up ocbaud he has them... __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

07-08-2003, 02:48 AM	#3
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	Welcome to the board! Both LMC & Chevy Duty have them in their respective catalogs. Check Swervin's site too. http://www.73-87.com/ __________________ Mitch 1978 Chevrolet Silverado C 10 454 BB, TH400 Last edited by 78SilveradoSWB; 07-08-2003 at 02:51 AM.

07-08-2003, 04:45 PM	#5
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	You can also get them at trucks & vans - anyone have the URL? I'm not at home. Alot of members went there for billet. __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

07-08-2003, 05:03 PM	#6
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	http://www.trucknvans.com/billetacc/ This is where I bought mine. __________________ Mike 1985 Chevy C-10

07-08-2003, 02:36 PM	#4
lbbdoc Registered User Join Date: Jul 2003 Location: Lubbock, TX Posts: 113	thanks alot for welcoming me and for the info and so ther is no confusion im "docs" son and its my truck but he bought it for me thanks again.

07-08-2003, 05:08 PM	#7
lbbdoc Registered User Join Date: Jul 2003 Location: Lubbock, TX Posts: 113	mike how much was yours and how hard was it to instal?

07-08-2003, 05:12 PM	#8
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	All of my billet is polished, but they also have brushed too. I got the instrument bezel, dash insert, and both door inserts, without pull straps covers. All total, shipping and all it was $207.40.

07-08-2003, 05:13 PM	#9
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Oh, on the install, not bad. You just screw them over the top of the stock stuff.

07-08-2003, 05:18 PM	#10
lbbdoc Registered User Join Date: Jul 2003 Location: Lubbock, TX Posts: 113	thanks alot for the info your truck is nice it looks alot like mine

07-08-2003, 06:13 PM	#12
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	Thats alot cheaper than I thought it would be. I bought the brushed aluminum piece for the dash for 60$. Im going to switch to polished I like it much better. __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

07-08-2003, 07:14 PM	#13
lbbdoc Registered User Join Date: Jul 2003 Location: Lubbock, TX Posts: 113	thanks ill look at all the sites and prices

07-08-2003, 07:14 PM	#14
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Hey, stock stuff looks good sometimes too. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

07-08-2003, 08:32 PM	#15
lbbdoc Registered User Join Date: Jul 2003 Location: Lubbock, TX Posts: 113	yea it does but my stock stuff has little white spots on it.

07-08-2003, 08:47 PM	#17
lbbdoc Registered User Join Date: Jul 2003 Location: Lubbock, TX Posts: 113	Adam your truck looks sweet what mods do you have -lbbdoc-



Register or Log In To remove these advertisements.

07-08-2003, 10:03 PM	#18
boataddict26 Registered User Join Date: Mar 2003 Location: North Central Florida Posts: 726	Does everyone agree that Classic Industries has good prices? I compare all the prices of the big companies, but there are alot of other ones out there that I dont know about that may be better. __________________ 1978 Chevy C10 Currently under resto. 350 Getting face lift. .060, JEpistons, Modify heads. More will come with money.

07-08-2003, 11:54 PM	#19
allthrtl Available for Adoption Join Date: May 2003 Location: Lubbock Tx Posts: 177	Cool, another Lubbockite.......welcome to the board lbbdoc... __________________ 1983 C10 SWB 2001 Silverado SWB 1995 Corvette

07-12-2003, 11:45 AM	#20
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	any pics of both finishes? __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.