What did you get done 3/20/11 edition - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

S10Fan · 03-21-2011, 12:21 PM

Quote:

Originally Posted by jrcaprai

Keep us updated on the functionality of the elec door openers...

I had some on mine, and they were very intermittent. if i would shut the door to hard it would put the solenoid just enough out of adjustment so they would not work... this was years ago, maybe the newer ones are better now??

Same here, I was so aggravated with them I considered swapping in new doors. A friend recommended I look at what AVS had to offer. One word, awesome! My doors now work flawlessly. AVS is also a board vendor. I can't brag about AVS enough, awesome product!

http://www.avsontheweb.com/home.php

texasfunk · 03-21-2011, 01:24 PM

Quote:

Originally Posted by S10Fan

Same here, I was so aggravated with them I considered swapping in new doors. A friend recommended I look at what AVS had to offer. One word, awesome! My doors now work flawlessly. AVS is also a board vendor. I can't brag about AVS enough, awesome product!

http://www.avsontheweb.com/home.php

I agree 100%!!!!
Posted via Mobile Device

wklink · 03-21-2011, 02:54 PM

Got the seat I bought installed.

softballnrd27 · 03-21-2011, 03:15 PM

My wife picked up a 2004 6.0l LQ4 for me. It is complete from oil pan to intake, fan to flexplate with the wiring harness for $975. Only thing that ddn't cme with it was the ac compressor and computer.

Melmann · 03-21-2011, 08:18 PM

I used connectors that allow for adjustment. Don't use the squeeze on type connectors, they are permanent. You get a little stretch on the braided cables, you can always tweak them. I will wait and install the door panels once I finish up the rest of the interior. I don't have any problems at this time, everything is working as it should! I used electrical screw type connectors that are for ground wires. They will tighten up and hold the braided wires.

03-21-2011, 02:54 PM	#28
wklink Junior Member Join Date: Sep 2006 Location: Olympia, WA Posts: 122	Re: What did you get done 3/20/11 edition Got the seat I bought installed. __________________ I let my 16 year old son drive my every car that I own. I don't let him drive my truck. A man has to draw a line somewhere.

03-21-2011, 03:15 PM	#29
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: What did you get done 3/20/11 edition My wife picked up a 2004 6.0l LQ4 for me. It is complete from oil pan to intake, fan to flexplate with the wiring harness for $975. Only thing that ddn't cme with it was the ac compressor and computer. __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168

03-21-2011, 08:18 PM	#30
Melmann Registered User Join Date: May 2007 Location: Lagrange Ga Posts: 48	Re: What did you get done 3/20/11 edition I used connectors that allow for adjustment. Don't use the squeeze on type connectors, they are permanent. You get a little stretch on the braided cables, you can always tweak them. I will wait and install the door panels once I finish up the rest of the interior. I don't have any problems at this time, everything is working as it should! I used electrical screw type connectors that are for ground wires. They will tighten up and hold the braided wires. __________________ Mel

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.