VA Tilt column blowout - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 03-20-2011, 01:39 PM

I need to fund my project so my stash of tilts needs to be thinned

I'm not going to give them away as I have 3 swap meets upcoming I am sure I can unload them at....but would like to offer here first

Pictures this evening

True 67-72 4spd tilt, got in trade for buddy buckets....I have not gone through it but tilt seems tight and has a new in pkg tilt lever. No turn signal lever/guts and no horn guts. Cosmetically looks nice other than one dent on the upper sleeve. 395 picked up or 440 shipped with insurance

True 67-72 column shift tilt. Came out of my 72 super cheyenne. Mising all levers and indicator/housing. Tilt is tight but I do not know condition of horn button or wiring (it isn't cut though) $275 picked up or 305 shipped with no levers. Has a later model wheel on it I will include for free local or $20 extra shipping. Intermediate shaft not included.

Van column shift tilt. Tight tilt and bearings. Has the correct wiring for our trucks. Levers are the short style shifter (which I prefer anyways) and all are in nice shape. Can be put in a truck and run as is, or you can collapse the intermediate shaft so it doesn't stick out as far, or can cut it down to the size of a true truck tilt
Asking 225 picked up or 265 shipped with all levers still installed-ready to bolt in.

1972K20 · 03-20-2011, 01:49 PM

Will you go $400.00 shipped on the 4spd tilt? Any pics?

Thanks

VA72C10 · 03-20-2011, 01:50 PM

Quote:

Originally Posted by 1972K20

Will you go $400.00 shipped on the 4spd tilt? Any pics?

Thanks

Pictures coming this evening per my post

I will give it a day or two and if no takers at my original price I'll do the 400 shipped.

1972K20 · 03-20-2011, 01:52 PM

Ok, I look forward to the pics

Thanks!

mo · 03-20-2011, 01:56 PM

put me in line for the 4 speed tilt column...i'll wait for pics

**jerry moss** · 03-20-2011, 02:41 PM

my rebuilt 4 speed tilt was 400.00 plus shipping over 10 years ago. very good price on a hard to find item.

kilomanjaro · 03-20-2011, 04:09 PM

I am not sure where I am at in line....I would take the 4-speed tilt for $440 shipped...pending pictures.
Thanks
John

VA72C10 · 03-20-2011, 06:52 PM

going to take pics as of now. As of now since 1972K20 pm'd me the line is

1972K20
mo
kilomanjaro

Thanks...pictures in a few...

VA72C10 · 03-20-2011, 08:01 PM

well, a couple of edits to note: the auto tilt column is missing the indicator also so I will lower that by $25

The 4spd tilt looks good but does have a dent I didn't originally notice in the top collar. Also I see no horn wiring and the turn signal cam is also removed. I am still asking the same for that for now.

4spd tilt

column shift van tilt

van column shift tilt

kilomanjaro · 03-20-2011, 09:09 PM

Is there any wiring there on the 4-speed column? I don't see the turn signal plug or horn wire.
John

VA72C10 · 03-20-2011, 09:20 PM

No, the turn signal and horn guts have the wires attached to them. As mentioned there aren't any guts...

kilomanjaro · 03-20-2011, 09:49 PM

I can't do $440 as it is....PM Sent.
Thanks
John

1972K20 · 03-20-2011, 09:53 PM

VA72C10,

The pics look good. I'll take the 4spd tilt for 440.

VA72C10 · 03-20-2011, 10:00 PM

4spd tilt Sold! pm sent. Thanks

VA72C10 · 03-21-2011, 11:57 PM

ttt for auto van tilt and auto true truck tilt

VA72C10 · 03-22-2011, 11:23 PM

ttt

redbaron69 · 03-23-2011, 10:00 PM

pm sent on truck tilt

mo · 03-23-2011, 10:05 PM

Good Deal!

VA72C10 · 03-25-2011, 04:19 PM

Quote:

Originally Posted by redbaron69

pm sent on truck tilt

pm returned

Quote:

Originally Posted by mo

Good Deal!

Thanks

Truck tilt pictured is now unavailable. Going to be swapped for a restored column....so I will be posting my really nice original column later....has the shift handle and indicator and is very nice overall. Will be asking 320 picked up for that one.

1972K20 · 03-25-2011, 05:56 PM

VA72C10,

Received the 4spd tilt. It looks good.

VA72C10 · 03-25-2011, 07:43 PM

Quote:

Originally Posted by 1972K20

VA72C10,

Received the 4spd tilt. It looks good.

Cool. Did you notice the inner box? I had a truck tilt shipped to me with no padding in the inner box

Added some padding and then threw it in another box to make sure it would arrive safely.

junkyardjohn · 03-26-2011, 10:48 AM

I try to pack stuff the way I would like to recieve it. It all boils down, back to the GOLDEN RULE we all learned back in the sandbox days.

John

1972K20 · 03-26-2011, 11:05 AM

Quote:

Originally Posted by VA72C10

Cool. Did you notice the inner box? I had a truck tilt shipped to me with no padding in the inner box

Added some padding and then threw it in another box to make sure it would arrive safely.

I did notice.

It was packed very well. Thanks!

VA72C10 · 04-01-2011, 11:36 PM

ttt

03-20-2011, 01:39 PM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Tilt column blowout I need to fund my project so my stash of tilts needs to be thinned I'm not going to give them away as I have 3 swap meets upcoming I am sure I can unload them at....but would like to offer here first Pictures this evening True 67-72 4spd tilt, got in trade for buddy buckets....I have not gone through it but tilt seems tight and has a new in pkg tilt lever. No turn signal lever/guts and no horn guts. Cosmetically looks nice other than one dent on the upper sleeve. 395 picked up or 440 shipped with insurance True 67-72 column shift tilt. Came out of my 72 super cheyenne. Mising all levers and indicator/housing. Tilt is tight but I do not know condition of horn button or wiring (it isn't cut though) $275 picked up or 305 shipped with no levers. Has a later model wheel on it I will include for free local or $20 extra shipping. Intermediate shaft not included. Van column shift tilt. Tight tilt and bearings. Has the correct wiring for our trucks. Levers are the short style shifter (which I prefer anyways) and all are in nice shape. Can be put in a truck and run as is, or you can collapse the intermediate shaft so it doesn't stick out as far, or can cut it down to the size of a true truck tilt Asking 225 picked up or 265 shipped with all levers still installed-ready to bolt in. __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 03-20-2011 at 08:03 PM.

03-20-2011, 01:49 PM	#2
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 743	Re: Tilt column blowout Will you go $400.00 shipped on the 4spd tilt? Any pics? Thanks

03-20-2011, 01:52 PM	#4
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 743	Re: Tilt column blowout Ok, I look forward to the pics Thanks!

03-20-2011, 01:56 PM	#5
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: Tilt column blowout put me in line for the 4 speed tilt column...i'll wait for pics

03-20-2011, 02:41 PM	#6
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,960	Re: Tilt column blowout my rebuilt 4 speed tilt was 400.00 plus shipping over 10 years ago. very good price on a hard to find item. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

03-20-2011, 04:09 PM	#7
kilomanjaro Senior Member Join Date: Mar 2001 Location: From Kansas now in Palmer, Alaska Posts: 807	Re: Tilt column blowout I am not sure where I am at in line....I would take the 4-speed tilt for $440 shipped...pending pictures. Thanks John __________________ 63 Buick Wildcat 425 72 Chevy Blazer CST 72 Chevy C10 Cheyenne 00 Ford F-350 Super Duty 7.3L 09 Dodge Challenger SRT-8 10 Ford Expedition Limited

03-20-2011, 06:52 PM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tilt column blowout going to take pics as of now. As of now since 1972K20 pm'd me the line is 1972K20 mo kilomanjaro Thanks...pictures in a few... __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-20-2011, 08:01 PM	#9
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tilt column blowout well, a couple of edits to note: the auto tilt column is missing the indicator also so I will lower that by $25 The 4spd tilt looks good but does have a dent I didn't originally notice in the top collar. Also I see no horn wiring and the turn signal cam is also removed. I am still asking the same for that for now. 4spd tilt column shift van tilt van column shift tilt __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-20-2011, 09:09 PM	#10
kilomanjaro Senior Member Join Date: Mar 2001 Location: From Kansas now in Palmer, Alaska Posts: 807	Re: Tilt column blowout Is there any wiring there on the 4-speed column? I don't see the turn signal plug or horn wire. John __________________ 63 Buick Wildcat 425 72 Chevy Blazer CST 72 Chevy C10 Cheyenne 00 Ford F-350 Super Duty 7.3L 09 Dodge Challenger SRT-8 10 Ford Expedition Limited

03-20-2011, 09:20 PM	#11
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tilt column blowout No, the turn signal and horn guts have the wires attached to them. As mentioned there aren't any guts... __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-20-2011, 09:49 PM	#12
kilomanjaro Senior Member Join Date: Mar 2001 Location: From Kansas now in Palmer, Alaska Posts: 807	Re: Tilt column blowout I can't do $440 as it is....PM Sent. Thanks John __________________ 63 Buick Wildcat 425 72 Chevy Blazer CST 72 Chevy C10 Cheyenne 00 Ford F-350 Super Duty 7.3L 09 Dodge Challenger SRT-8 10 Ford Expedition Limited

03-20-2011, 09:53 PM	#13
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 743	Re: Tilt column blowout VA72C10, The pics look good. I'll take the 4spd tilt for 440.

03-20-2011, 10:00 PM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tilt column blowout 4spd tilt Sold! pm sent. Thanks __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 03-21-2011 at 11:57 PM.

03-21-2011, 11:57 PM	#15
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tilt column blowout ttt for auto van tilt and auto true truck tilt __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-22-2011, 11:23 PM	#16
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tilt column blowout ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

03-23-2011, 10:00 PM	#17
redbaron69 Registered User Join Date: Jan 2009 Location: marion nc Posts: 588	Re: Tilt column blowout pm sent on truck tilt __________________ 69 short fleet 350/350 "under construction" 70 short step 307/3 speed

03-23-2011, 10:05 PM	#18
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: Tilt column blowout Good Deal!

03-25-2011, 05:56 PM	#20
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 743	Re: Tilt column blowout VA72C10, Received the 4spd tilt. It looks good.

03-26-2011, 10:48 AM	#22
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	Re: Tilt column blowout I try to pack stuff the way I would like to recieve it. It all boils down, back to the GOLDEN RULE we all learned back in the sandbox days. John __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST Last edited by junkyardjohn; 03-26-2011 at 10:49 AM.

04-01-2011, 11:36 PM	#24
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tilt column blowout ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.