Parts PARTs for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

phantom dually · 07-16-2003, 10:13 PM

I have a power steering setup from a 83 1/2 ton. Also a set off 87 1/2 ton factory exhaust manifolds, 700r4 from a 92 Camaro w/40k miles on it. Also have a stall to go with it 2500. Have a TH350 w/9" tailshaft very low miles on rebuild w/ shift kit. Have a alternator with serpentine pulley on it a few brackets and a water pump with maybe 2 hrs on it. Msd 6A ignition box with maybe 4 hrs on it. Also have a complete doghouse from a 83. Have 2 new inner fenders from LMC truck. Have a grille from a 91 SUB. 2 factory hoods in good shape. E mail me for pics and make a reasonable offer. Located in LOUISVILLE KY home of the HOT rod nationals July 31st thru august the 3rd. If you have never been imagine 10,000 of the best cars in the world. ITS AWESOME!! Call me also if needed. 502-376-9408. Thanks Eric

alf4444 · 07-17-2003, 02:29 PM

do you have the power steering brackets and how much?

C&C Chevy · 07-17-2003, 04:32 PM

How much for the MSD 6A box?

truckman32 · 07-17-2003, 06:28 PM

hey phantom i'm from ky also in mt.sterling i have a 84 c10 and i need to know what you asking for the alt and one of the stock hoods

phantom dually · 07-18-2003, 05:27 PM

$95 for the hood and for the alternator.

phantom dually · 07-18-2003, 05:27 PM

Msd 6a $100 shipped in the lower 48

phantom dually · 07-18-2003, 05:28 PM

I should have the brackets. I pulled it all of in one piece I will check tonight.

phantom dually · 07-18-2003, 05:29 PM

$225 for the 700r4 pick up only!!

phantom dually · 07-18-2003, 05:30 PM

$225 for the TH350 pick up only!!

C&C Chevy · 07-18-2003, 08:08 PM

I'll pass on the MSD box.

phantom dually · 07-19-2003, 10:32 PM

TTT

truckman32 · 07-20-2003, 07:08 AM

phantom is that 95 for both the hood and alt can you post some pictures of your stuff you are selling

phantom dually · 07-20-2003, 11:08 AM

Yes $95 for both. I will get some pics and post asap. Thanks

method2mymadnes · 07-20-2003, 09:26 PM

How much for the exhaust manifolds?

Old Chevy Lover · 07-20-2003, 11:06 PM

Did you have the tranny's in something, drive them, have them rebuilt yourself? does the 700r4 have a shift kit in it or anything?

chevy68388 · 07-20-2003, 11:14 PM

hey is that msd box the 6aL or just the 6a im looking for the one that has the rev limmiter chips alos is it have the hei set up for it or just the box hey why dont u just email me cause i dont get on here as much as i used to dksixpack289@aol.com

phantom dually · 07-21-2003, 07:34 PM

6A does not a have rev limiter. Also the manifolds $20 plus the ride!! Both trannys I have had built locally and are in perfect condition and have been driven and not reused.

phantom dually · 07-22-2003, 08:35 PM

Here are a few quick pics. Any question let me know!

phantom dually · 07-22-2003, 08:36 PM

pic

phantom dually · 07-22-2003, 08:37 PM

pic

phantom dually · 07-22-2003, 08:40 PM

pictures

phantom dually · 07-22-2003, 08:44 PM

picture

phantom dually · 07-22-2003, 08:44 PM

pics

phantom dually · 07-22-2003, 08:46 PM

pic

phantom dually · 07-22-2003, 08:47 PM

pictures

07-16-2003, 10:13 PM	#1
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Parts PARTs for sale I have a power steering setup from a 83 1/2 ton. Also a set off 87 1/2 ton factory exhaust manifolds, 700r4 from a 92 Camaro w/40k miles on it. Also have a stall to go with it 2500. Have a TH350 w/9" tailshaft very low miles on rebuild w/ shift kit. Have a alternator with serpentine pulley on it a few brackets and a water pump with maybe 2 hrs on it. Msd 6A ignition box with maybe 4 hrs on it. Also have a complete doghouse from a 83. Have 2 new inner fenders from LMC truck. Have a grille from a 91 SUB. 2 factory hoods in good shape. E mail me for pics and make a reasonable offer. Located in LOUISVILLE KY home of the HOT rod nationals July 31st thru august the 3rd. If you have never been imagine 10,000 of the best cars in the world. ITS AWESOME!! Call me also if needed. 502-376-9408. Thanks Eric

07-17-2003, 02:29 PM	#2
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	do you have the power steering brackets and how much? __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

07-17-2003, 04:32 PM	#3
C&C Chevy Registered User Join Date: Feb 2003 Location: Midwest City, OK Posts: 1,001	How much for the MSD 6A box? __________________ Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007

07-17-2003, 06:28 PM	#4
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	hey phantom i'm from ky also in mt.sterling i have a 84 c10 and i need to know what you asking for the alt and one of the stock hoods __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

07-18-2003, 05:27 PM	#5
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	$95 for the hood and for the alternator. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

07-18-2003, 05:27 PM	#6
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Msd 6a $100 shipped in the lower 48 __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

07-18-2003, 05:28 PM	#7
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I should have the brackets. I pulled it all of in one piece I will check tonight. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

07-18-2003, 05:29 PM	#8
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	$225 for the 700r4 pick up only!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

07-18-2003, 05:30 PM	#9
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	$225 for the TH350 pick up only!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

07-18-2003, 08:08 PM	#10
C&C Chevy Registered User Join Date: Feb 2003 Location: Midwest City, OK Posts: 1,001	I'll pass on the MSD box. __________________ Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007

07-19-2003, 10:32 PM	#11
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

07-20-2003, 07:08 AM	#12
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	phantom is that 95 for both the hood and alt can you post some pictures of your stuff you are selling __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

07-20-2003, 11:08 AM	#13
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Yes $95 for both. I will get some pics and post asap. Thanks __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

07-20-2003, 09:26 PM	#14
method2mymadnes Registered User Join Date: Jun 2003 Location: Dyersburg, TN Posts: 327	How much for the exhaust manifolds? __________________ 87% of all statistics are made up on the spot.

07-20-2003, 11:06 PM	#15
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	Did you have the tranny's in something, drive them, have them rebuilt yourself? does the 700r4 have a shift kit in it or anything? __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto



Register or Log In To remove these advertisements.

07-20-2003, 11:14 PM	#16
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	hey is that msd box the 6aL or just the 6a im looking for the one that has the rev limmiter chips alos is it have the hei set up for it or just the box hey why dont u just email me cause i dont get on here as much as i used to dksixpack289@aol.com __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s Last edited by chevy68388; 07-21-2003 at 03:23 AM.

07-21-2003, 07:34 PM	#17
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	6A does not a have rev limiter. Also the manifolds $20 plus the ride!! Both trannys I have had built locally and are in perfect condition and have been driven and not reused. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

07-22-2003, 08:35 PM	#18
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Here are a few quick pics. Any question let me know! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

07-22-2003, 08:36 PM	#19
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	pic pic Attached Images

07-22-2003, 08:37 PM	#20
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	pic Attached Images

07-22-2003, 08:40 PM	#21
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	pictures Attached Images

07-22-2003, 08:44 PM	#22
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	picture Attached Images

07-22-2003, 08:44 PM	#23
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	pics Attached Images

07-22-2003, 08:46 PM	#24
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	pic Attached Images

07-22-2003, 08:47 PM	#25
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	pictures Attached Images

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode