|
04-25-2011, 05:47 PM
|
#1 |
|
Registered User
Join Date: Oct 2007
Location: Valley Springs, Ca
Posts: 857
|
Air Bag Cups
I am going to work on installing my front air bags and I wanted to create the cups and brackets my self since they look pretty forward but knowing that the Stock Lower control arms have a groove in them where the original springs sat and the bottom cups for the bags will sit in the same area. I am wondering if the cups that people purchase are flat or have a groove/slanted edge so they are able to fit in the control arms.?
Also is it best to Weld them in?
__________________
 My Build Threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=442487 My Picture Gallery http://67-72chevytrucks.com/gallery/...0&ppuser=36004 Last edited by Jeffs70; 04-25-2011 at 05:49 PM. |
|
|
|
04-25-2011, 05:55 PM
|
#2 |
|
Registered User
 
Join Date: Apr 2004
Location: Sacramento
Posts: 3,737
|
Re: Air Bag Cups
Mine are flat and are not welded to the LCA
__________________
'72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht |
|
|
|
|
04-25-2011, 06:02 PM
|
#3 | |
|
Registered User
Join Date: Oct 2007
Location: Valley Springs, Ca
Posts: 857
|
Re: Air Bag Cups
Quote:
__________________
My Build Threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=442487 My Picture Gallery http://67-72chevytrucks.com/gallery/...0&ppuser=36004 |
|
|
|
|
|
04-26-2011, 04:53 PM
|
#4 |
|
Registered User
Join Date: Jul 2010
Location: "THE BIG EASY" New Orleans. LA
Posts: 108
|
Re: Air Bag Cups
Mine are flat. I cut them down to 1.5in tall. They are not welded, they just set into place.
__________________
Get Low |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
