i have a 65 c10 v8

[Captainfab]

Which trans?

There is a good thread over in the 'Engine and Drivetrain' section, with lots of info on a T5 conversion.

http://67-72chevytrucks.com/vboard/s...d.php?t=313954

The NV3500 has an integral bellhousing, and is only a hydraulicly actuated clutch. What flywheel will depend on what engine you have. For a trans crossmember, you will just need one from a '63-'87 2wd pickup or Suburban with an auto trans, or possible from a '73-'87 with a manual trans. The yoke will need to be specific for the trans used, but you may need a conversion U-joint to mate that to your driveshaft.

Originally Posted by sinnersahuayo

the bell housing, flywheel, trans mount, and yuke would fit or i have to mod it