The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.
Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board
Reload this Page 67-72 cab corner 6x9 speaker brackets

Web 67-72chevytrucks.com
Home Forums Gallery Site Merchandise Register FAQ Members List Subscribe Calendar Mark Forums Read


Reply
Page 10 of 30 « First 56789 10 111213141520 Last »
 
Thread Tools Display Modes
Old 08-06-2012, 01:17 PM   #1
bigblock73
yeller
 
bigblock73's Avatar
 
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
Re: 67-72 cab corner 6x9 speaker brackets
Quote:
Originally Posted by vman1213 View Post
Can You Make These With cut out for 6.5 speakers? Cuz i Dont Have Tools To Cut it Myself

Thanks
Not at a reasonable price unfortunately...one-offs can easily add $75 to the price for a single set.

I would suspect that any fab shop could cut the holes for you for much less than that. I do sell brackets with NO holes, giving you a clean slate for the size and position you desire.
bigblock73 is offline   Reply With Quote
Old 08-14-2012, 05:26 PM   #2
kamikazekyle05
Registered User
 
kamikazekyle05's Avatar
 
Join Date: Nov 2007
Location: Vernon, Texas
Posts: 331
Re: 67-72 cab corner 6x9 speaker brackets
Ill take a set of the 67-72 with holes if you have any more available
kamikazekyle05 is offline   Reply With Quote
Old 08-14-2012, 08:47 PM   #3
bigblock73
yeller
 
bigblock73's Avatar
 
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
Re: 67-72 cab corner 6x9 speaker brackets
Quote:
Originally Posted by kamikazekyle05 View Post
Ill take a set of the 67-72 with holes if you have any more available
PM sent
bigblock73 is offline   Reply With Quote
Old 08-19-2012, 03:22 PM   #4
Tinkermc
Registered User
 
Join Date: Jul 2011
Location: Farmville, Va
Posts: 3,026
Re: 67-72 cab corner 6x9 speaker brackets
let me help u out, ttt
Tinkermc is offline   Reply With Quote
Old 08-19-2012, 04:05 PM   #5
hevy_chevy67
Registered User
 
hevy_chevy67's Avatar
 
Join Date: May 2005
Location: Blackfalds, Alberta
Posts: 618
Re: 67-72 cab corner 6x9 speaker brackets
PM sent.
__________________
1971 Chevrolet K10 - SWB, 5.3LS, 4L60e
1970 Chevrolet K5 Blazer - Project
1969 Chevrolet C10 - SWB, 350 Holley Sniper, 700r4
1969 GMC Suburban - 5.3 LS, 4L60e
hevy_chevy67 is online now   Reply With Quote
Old 08-29-2012, 12:14 AM   #6
bigblock73
yeller
 
bigblock73's Avatar
 
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
Re: 67-72 cab corner 6x9 speaker brackets
ttt
bigblock73 is offline   Reply With Quote
Old 08-29-2012, 12:30 AM   #7
thelonerife
Senior Member
 
thelonerife's Avatar
 
Join Date: Jul 2007
Location: Clarksville TN 37043
Posts: 8,702
Re: 67-72 cab corner 6x9 speaker brackets
I'll take a set with holes.
thelonerife is offline   Reply With Quote
Old 08-29-2012, 11:36 PM   #8
bigblock73
yeller
 
bigblock73's Avatar
 
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
Re: 67-72 cab corner 6x9 speaker brackets
Quote:
Originally Posted by thelonerife View Post
I'll take a set with holes.
PM sent
bigblock73 is offline   Reply With Quote
Old 08-30-2012, 12:08 AM   #9
thelonerife
Senior Member
 
thelonerife's Avatar
 
Join Date: Jul 2007
Location: Clarksville TN 37043
Posts: 8,702
Re: 67-72 cab corner 6x9 speaker brackets
pmt sent. Thanks.
thelonerife is offline   Reply With Quote
Old 08-30-2012, 01:14 AM   #10
nitrosport_5
Registered User
 
nitrosport_5's Avatar
 
Join Date: Jul 2012
Location: St. John, Washington
Posts: 618
Re: 67-72 cab corner 6x9 speaker brackets
I just sent you a PM. thanks
__________________
"Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT
"Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C.
"1968" C10 Shortbed project
nitrosport_5 is offline   Reply With Quote
Old 08-30-2012, 07:15 AM   #11
bigblock73
yeller
 
bigblock73's Avatar
 
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
Re: 67-72 cab corner 6x9 speaker brackets
Chuck, got it, thank you. Brackets will go out Friday.

Nitro, PM replied.
bigblock73 is offline   Reply With Quote
Old 08-30-2012, 08:12 AM   #12
Crash_OK
Registered User
 
Crash_OK's Avatar
 
Join Date: Nov 2011
Location: Edmond, OK.
Posts: 1,362
Re: 67-72 cab corner 6x9 speaker brackets
I need a set with holes, for my 69..
__________________
Mark
-----------------------

Crash's 69 4x4 SWB

Crash's Roof over Lake Home

Crash's 1988 Land Cruiser Build
Crash_OK is offline   Reply With Quote
Old 08-30-2012, 02:17 PM   #13
bigblock73
yeller
 
bigblock73's Avatar
 
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
Re: 67-72 cab corner 6x9 speaker brackets
Quote:
Originally Posted by Crash_OK View Post
I need a set with holes, for my 69..
PM sent
bigblock73 is offline   Reply With Quote
Old 08-30-2012, 02:58 PM   #14
Crash_OK
Registered User
 
Crash_OK's Avatar
 
Join Date: Nov 2011
Location: Edmond, OK.
Posts: 1,362
Re: 67-72 cab corner 6x9 speaker brackets
Quote:
Originally Posted by bigblock73 View Post
PM sent
Got it.. Payment sent..
__________________
Mark
-----------------------

Crash's 69 4x4 SWB

Crash's Roof over Lake Home

Crash's 1988 Land Cruiser Build
Crash_OK is offline   Reply With Quote
Old 08-31-2012, 12:23 AM   #15
bigblock73
yeller
 
bigblock73's Avatar
 
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
Re: 67-72 cab corner 6x9 speaker brackets
Guys, all three of your brackets will be in tomorrows mail (Friday). Thanks for the purchase, have a great Labor Day weekend!
bigblock73 is offline   Reply With Quote
Old 09-06-2012, 08:04 PM   #16
thelonerife
Senior Member
 
thelonerife's Avatar
 
Join Date: Jul 2007
Location: Clarksville TN 37043
Posts: 8,702
Re: 67-72 cab corner 6x9 speaker brackets
I got mine today and installed them. I welded the bottom bracket to the cab floor instead of drilling the holes and mounting. I had to put a little more angle on (the bottom brackets) to make them sit flush with the floor. I will put Dynamat throughout my cab after I clean and paint the inside of my cab corners. Then I'll re-install them.
I am pleased with the quality of the brackets and if any of you are on the fence about buying a set, They are worth the money imo. I would spend a lot of time trying to get the cuts and correct bends on these if I were to start from scratch. I installed mine in about 30 minutes.
Attached Images
   
thelonerife is offline   Reply With Quote
Old 09-07-2012, 10:22 PM   #17
bigblock73
yeller
 
bigblock73's Avatar
 
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
Re: 67-72 cab corner 6x9 speaker brackets
Quote:
Originally Posted by thelonerife View Post
I got mine today and installed them. I welded the bottom bracket to the cab floor instead of drilling the holes and mounting. I had to put a little more angle on (the bottom brackets) to make them sit flush with the floor. I will put Dynamat throughout my cab after I clean and paint the inside of my cab corners. Then I'll re-install them.
I am pleased with the quality of the brackets and if any of you are on the fence about buying a set, They are worth the money imo. I would spend a lot of time trying to get the cuts and correct bends on these if I were to start from scratch. I installed mine in about 30 minutes.
Thank you for the feedback, and your install looks great! You might have been able to tack weld them where the pilot holes were too, might have made it a bit cleaner...not that you will even see the floor brackets anyhow.

If I understood you correctly, you said the factory floor jack assembly will clear the passenger bracket? if so, that is great...I didn't have an assembly in the junk cab I bought to create these.

Again, thanks for the feedback!
bigblock73 is offline   Reply With Quote
Old 09-06-2012, 08:06 PM   #18
thelonerife
Senior Member
 
thelonerife's Avatar
 
Join Date: Jul 2007
Location: Clarksville TN 37043
Posts: 8,702
Re: 67-72 cab corner 6x9 speaker brackets
Also my jack will fit where its supposed to, I just left it off.
thelonerife is offline   Reply With Quote
Old 09-06-2012, 08:08 PM   #19
TXPinstriper
Registered User
 
TXPinstriper's Avatar
 
Join Date: Jan 2012
Location: Santa Fe, Texas
Posts: 352
Re: 67-72 cab corner 6x9 speaker brackets
Sweet nice job ......
Posted via Mobile Device
TXPinstriper is offline   Reply With Quote
Old 09-06-2012, 09:12 PM   #20
thelonerife
Senior Member
 
thelonerife's Avatar
 
Join Date: Jul 2007
Location: Clarksville TN 37043
Posts: 8,702
Re: 67-72 cab corner 6x9 speaker brackets
thanks!
thelonerife is offline   Reply With Quote
Old 09-07-2012, 04:56 PM   #21
nitrosport_5
Registered User
 
nitrosport_5's Avatar
 
Join Date: Jul 2012
Location: St. John, Washington
Posts: 618
Re: 67-72 cab corner 6x9 speaker brackets
got mine today, and have to say they are a beautiful piece. will make a nice addition to my truck. thanks for making these available bigblock73
__________________
"Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT
"Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C.
"1968" C10 Shortbed project
nitrosport_5 is offline   Reply With Quote
Old 09-07-2012, 10:25 PM   #22
bigblock73
yeller
 
bigblock73's Avatar
 
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
Re: 67-72 cab corner 6x9 speaker brackets
Quote:
Originally Posted by nitrosport_5 View Post
got mine today, and have to say they are a beautiful piece. will make a nice addition to my truck. thanks for making these available bigblock73
You are welcome, and thank you for the feedback as well.
bigblock73 is offline   Reply With Quote
Old 09-07-2012, 10:27 PM   #23
bigblock73
yeller
 
bigblock73's Avatar
 
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
Re: 67-72 cab corner 6x9 speaker brackets
Folks, the next batch I order, I am going to have the shop cut some with 6.5" openings, for those wanting to run components. If anyone is interested, please PM me...if I get enough interest, we can set up a pre-orders and I can have them cut and delivered sooner.

Price will be the same as these too.
bigblock73 is offline   Reply With Quote
Old 09-13-2012, 01:05 PM   #24
longbed67
Registered User
 
longbed67's Avatar
 
Join Date: Jun 2011
Location: Monroe, WI
Posts: 1,415
Re: 67-72 cab corner 6x9 speaker brackets
I will take a set with the 6x9 opening in them if you still have any!
__________________
Adam

My 1967 C10 - Turbo 250 Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=485843

(608) 214-8706
longbed67 is offline   Reply With Quote
Old 09-13-2012, 10:54 PM   #25
lineman14
Registered User
 
lineman14's Avatar
 
Join Date: Mar 2012
Location: Chattanooga, OK
Posts: 8
Re: 67-72 cab corner 6x9 speaker brackets
I'll take a set of the 6"x9" also.
lineman14 is offline   Reply With Quote
Reply
Page 10 of 30 « First 56789 10 111213141520 Last »

Bookmarks

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Hybrid Mode Hybrid Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 09:00 AM.

67-72chevytrucks.com - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com