PWR STR hose ?

[towersddg9]

Need some help on running these power steering lines here are some pics of my set up, I do know the large 10an from remote resivoir goes to the 10an port on the pump, question is does anyone know where to run the others
Thanks

[Captainfab]

It looks to me like you need a line from the reservior to the intake on the pump, Then another hose from the pressure side of the pump to the steering box, and then your return line goes from the steering box back to the other port on the reservior

[towersddg9]

Originally Posted by Captainfab

It looks to me like you need a line from the reservior to the intake on the pump, Then another hose from the pressure side of the pump to the steering box, and then your return line goes from the steering box back to the other port on the reservior

Thank You Capt

[shortbed70]

Post 428 in my build shows how mine is done. I have a big feed line off the bottom of the resi going to the matching port on the pump then small line out to box. Im not sure if mine are in the right orientation but my pressure line goes to the furthest port and the return. Goes back to resi.
Posted via Mobile Device

[TR65]

Just to be clear.

The output of the pump (the small line) goes to the P/S box port closest to the frame. It has a bigger thread than the other port to prevent mix-up. This is the high pressure line, has to be special hose for the pressure.

The other port from the P/S box is the return and goes to the small fitting on the reservoir.

The big line from the reservoir is the pump suction line.

TR