AL In for parts: 1971 GMC 350/AC - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JQ-72** · 07-25-2011, 10:10 PM

threw in an extra fender emblem.

**JQ-72** · 07-25-2011, 10:20 PM

More stuff for sale:

1. Park lamp assemblies. Lens have good orange color, a few small cracks in plastic. Good driver condition - $40 shipped in US.
2. Black visors and clips. Need cleaned, no rips and stitching is intact. $65 shipped in US.
3. Black auto column. No pic, but indicator housing is good, levers have minor rust. Includes linkage down to trans. $75 + shipping.
4. Matched set of 4 regulators (2 window, 2 door). All work great. $75 shipped in US.

Anything else? Will be hauling off for scrap in a week or so.

JQ

HDBOB · 07-25-2011, 11:25 PM

Hi,
Thanks for you reply . I'll do $80 Shipped for the bezels. You keep the emblems. Let me know.

jgaley69 · 07-25-2011, 11:31 PM

I'd be intrested in front Spindles. with calipers shipped to 38237?

**JQ-72** · 07-25-2011, 11:38 PM

HDbob - I'll do $90 shipped for the bezels. You won't be disappointed!
jgaley69 - give me a little while to get them pulled and weighed for shipping. I'll get back with you.
JQ

72cheyenneman · 07-26-2011, 07:06 AM

Thank God! I've been looking for these forever. I'll take the heat shields and everything else in picture #2. You've made me a very happy Swamp Man

Send me a PM with your PayPal info and I'll pay ASAP.

THANKS, Casey

tow guys · 07-26-2011, 11:35 AM

How is the inside of the passenger fender? The cup portion doesn't matter so much as I can repair that. Got any pics of the inside?
What condition are the fender eyebrows in?
I will take the bumper and brackets at 75$ plus shipping if the shipping isn't too bad. Maybe put it together with the fender on a pallet? Just a thought.
Let me know about the condition of those parts and a shipped total to zip 08721 and we can make a deal.
Thanks,
Tony

**JQ-72** · 07-26-2011, 02:59 PM

tow guys: Here's some pics of the fender. Dr. side is perfect. Pass. side has rust in the "cup", but that's all - rust free everywhere else. One small dent on the wheel opening (did not affect body line, just a dent). Eyebrow molding is good driver's condition. I'll do some studying on UPS and get you shipping quotes. $125 for the pair of fenders / molding.
Joshua

1970 custom · 07-26-2011, 03:06 PM

How much for the a/c controls and wiring harness with all duck work from heater core to deforster to 75789
Posted via Mobile Device

HDBOB · 07-26-2011, 06:22 PM

I'm Going to pass along the headlight bezels. Thanks anyways !

FrankC · 07-26-2011, 09:12 PM

hi jq

thanks for the pics of the doors. I will pass on them at this time.

Frank

**JQ-72** · 07-26-2011, 10:12 PM

1970 Custom - A/C controller has broken top lever, good wiring, duct work is dry and brittle, not usable. $45 shipped for controller & wiring.

bestchevyfan · 07-27-2011, 04:06 AM

Joshua, i will take the column. Will call you about picking it up.thanks,buddy

1970 custom · 07-27-2011, 08:26 AM

Not duct pipeing the box after heater core box and box next to it and box for defroster I will take the wiring harness it be friday when I send u payment pm me ur info please
Posted via Mobile Device

tow guys · 07-27-2011, 09:22 AM

I'm going to pass on the fenders but still interested in the bumper and brackets pending shipping costs to my zip.

rusty_67 · 07-27-2011, 01:00 PM

how are the grill top bar and eyebrows?

**JQ-72** · 07-27-2011, 11:38 PM

1970 Custom - you are basically needing all parts under dash?

rusty - top bar has a dent, eyebrows are usable - on small dent in one, both are really dull and have blisters.

JQ

1970 custom · 07-28-2011, 08:15 AM

Basicily yea exept the heatercore box everything after heater core box except duct and vents I have that
Posted via Mobile Device

projectjimmie68 · 07-28-2011, 06:17 PM

How are the transmission lines? If good how much plus shipping to zip 32136?

tow guys · 07-29-2011, 09:14 AM

Paypal has been sent for front bumper...
Thanks Joshua!

Tony

**JQ-72** · 07-29-2011, 03:18 PM

Transmission lines are no good. One broke while being pulled.

JQ

tow guys · 08-08-2011, 05:52 PM

Got the bumper today. Looks great! Thanks!

Tony

r6ring59 · 08-08-2011, 09:17 PM

[QUOTE=JQ-72;4805639]I just brought this one in to part out. 1971 GMC Custom 350/TH350 and AC. Original paint, but it has some rust issues. Visor area has cancer, door bottoms have a little rust. Bed floor has rust up front. See anything you need? I'm keeping the vintage slots (unless some one wants to drive here and give some mad cash!!

).
Joshua[/QUO Is the front passenger eyebrow chrome available If it is what is the condition, and what are you asking. Thanks Russ

**JQ-72** · 08-08-2011, 09:38 PM

Thanks to all who bought parts. She has gone to truck heaven.
Joshua

07-25-2011, 10:10 PM	#26
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,629	Re: In for parts: 1971 GMC 350/AC threw in an extra fender emblem. Attached Images __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

07-25-2011, 10:20 PM	#27
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,629	Re: In for parts: 1971 GMC 350/AC More stuff for sale: 1. Park lamp assemblies. Lens have good orange color, a few small cracks in plastic. Good driver condition - $40 shipped in US. 2. Black visors and clips. Need cleaned, no rips and stitching is intact. $65 shipped in US. 3. Black auto column. No pic, but indicator housing is good, levers have minor rust. Includes linkage down to trans. $75 + shipping. 4. Matched set of 4 regulators (2 window, 2 door). All work great. $75 shipped in US. Anything else? Will be hauling off for scrap in a week or so. JQ Attached Images __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior Last edited by JQ-72; 07-26-2011 at 10:14 PM.

07-25-2011, 11:25 PM	#28
HDBOB Registered User Join Date: Jan 2011 Location: laconia NH Posts: 196	Re: In for parts: 1971 GMC 350/AC Hi, Thanks for you reply . I'll do $80 Shipped for the bezels. You keep the emblems. Let me know.

07-25-2011, 11:31 PM	#29
jgaley69 Registered User Join Date: Nov 2010 Location: martin, tn Posts: 34	Re: In for parts: 1971 GMC 350/AC I'd be intrested in front Spindles. with calipers shipped to 38237? __________________ Jerry Galey

07-25-2011, 11:38 PM	#30
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,629	Re: In for parts: 1971 GMC 350/AC HDbob - I'll do $90 shipped for the bezels. You won't be disappointed! jgaley69 - give me a little while to get them pulled and weighed for shipping. I'll get back with you. JQ __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

07-26-2011, 07:06 AM	#31
72cheyenneman Registered User Join Date: Nov 2009 Location: New Orleans, Louisiana Posts: 610	Re: In for parts: 1971 GMC 350/AC Thank God! I've been looking for these forever. I'll take the heat shields and everything else in picture #2. You've made me a very happy Swamp Man Send me a PM with your PayPal info and I'll pay ASAP. THANKS, Casey

07-26-2011, 11:35 AM	#32
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: In for parts: 1971 GMC 350/AC How is the inside of the passenger fender? The cup portion doesn't matter so much as I can repair that. Got any pics of the inside? What condition are the fender eyebrows in? I will take the bumper and brackets at 75$ plus shipping if the shipping isn't too bad. Maybe put it together with the fender on a pallet? Just a thought. Let me know about the condition of those parts and a shipped total to zip 08721 and we can make a deal. Thanks, Tony __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org

07-26-2011, 02:59 PM	#33
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,629	Re: In for parts: 1971 GMC 350/AC tow guys: Here's some pics of the fender. Dr. side is perfect. Pass. side has rust in the "cup", but that's all - rust free everywhere else. One small dent on the wheel opening (did not affect body line, just a dent). Eyebrow molding is good driver's condition. I'll do some studying on UPS and get you shipping quotes. $125 for the pair of fenders / molding. Joshua Attached Images __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

07-26-2011, 03:06 PM	#34
1970 custom Registered User Join Date: Jun 2011 Location: troup tx Posts: 123	Re: In for parts: 1971 GMC 350/AC How much for the a/c controls and wiring harness with all duck work from heater core to deforster to 75789 Posted via Mobile Device

07-26-2011, 06:22 PM	#35
HDBOB Registered User Join Date: Jan 2011 Location: laconia NH Posts: 196	Re: In for parts: 1971 GMC 350/AC I'm Going to pass along the headlight bezels. Thanks anyways !

07-26-2011, 09:12 PM	#36
FrankC Registered User Join Date: Sep 2001 Location: Raleigh, NC USA Posts: 155	Re: In for parts: 1971 GMC 350/AC hi jq thanks for the pics of the doors. I will pass on them at this time. Frank __________________ Thanks, Frank

07-26-2011, 10:12 PM	#37
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,629	Re: In for parts: 1971 GMC 350/AC 1970 Custom - A/C controller has broken top lever, good wiring, duct work is dry and brittle, not usable. $45 shipped for controller & wiring. __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

07-27-2011, 04:06 AM	#38
bestchevyfan Registered User Join Date: Jun 2002 Location: new market, alabama Posts: 1,330	Re: In for parts: 1971 GMC 350/AC Joshua, i will take the column. Will call you about picking it up.thanks,buddy

07-27-2011, 08:26 AM	#39
1970 custom Registered User Join Date: Jun 2011 Location: troup tx Posts: 123	Re: In for parts: 1971 GMC 350/AC Not duct pipeing the box after heater core box and box next to it and box for defroster I will take the wiring harness it be friday when I send u payment pm me ur info please Posted via Mobile Device

07-27-2011, 09:22 AM	#40
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: In for parts: 1971 GMC 350/AC I'm going to pass on the fenders but still interested in the bumper and brackets pending shipping costs to my zip. __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org



Register or Log In To remove these advertisements.

07-27-2011, 01:00 PM	#41
rusty_67 Registered User Join Date: Jun 2010 Location: Kelowna, BC, Canada Posts: 184	Re: In for parts: 1971 GMC 350/AC how are the grill top bar and eyebrows?

07-27-2011, 11:38 PM	#42
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,629	Re: In for parts: 1971 GMC 350/AC 1970 Custom - you are basically needing all parts under dash? rusty - top bar has a dent, eyebrows are usable - on small dent in one, both are really dull and have blisters. JQ __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

07-28-2011, 08:15 AM	#43
1970 custom Registered User Join Date: Jun 2011 Location: troup tx Posts: 123	Re: In for parts: 1971 GMC 350/AC Basicily yea exept the heatercore box everything after heater core box except duct and vents I have that Posted via Mobile Device

07-28-2011, 06:17 PM	#44
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: In for parts: 1971 GMC 350/AC How are the transmission lines? If good how much plus shipping to zip 32136?

07-29-2011, 09:14 AM	#45
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: In for parts: 1971 GMC 350/AC Paypal has been sent for front bumper... Thanks Joshua! Tony __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org

07-29-2011, 03:18 PM	#46
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,629	Re: In for parts: 1971 GMC 350/AC Transmission lines are no good. One broke while being pulled. JQ __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

08-08-2011, 05:52 PM	#47
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: In for parts: 1971 GMC 350/AC Got the bumper today. Looks great! Thanks! Tony __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org

08-08-2011, 09:17 PM	#48
r6ring59 Registered User Join Date: Oct 2008 Location: omaha nebraska Posts: 8	Re: In for parts: 1971 GMC 350/AC [QUOTE=JQ-72;4805639]I just brought this one in to part out. 1971 GMC Custom 350/TH350 and AC. Original paint, but it has some rust issues. Visor area has cancer, door bottoms have a little rust. Bed floor has rust up front. See anything you need? I'm keeping the vintage slots (unless some one wants to drive here and give some mad cash!!). Joshua[/QUO Is the front passenger eyebrow chrome available If it is what is the condition, and what are you asking. Thanks Russ

08-08-2011, 09:38 PM	#49
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,629	Re: In for parts: 1971 GMC 350/AC Thanks to all who bought parts. She has gone to truck heaven. Joshua __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.