Very clean 71 W/ ac,ps,pb and TILT! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*boytoytrading* · 08-09-2003, 04:31 AM

As a whole or will part out. 1971 Chevy with a nice factory ac,ps,pb and a tilt wheel cad. The only bad spot is the driver rocker panel. The bed is a wood bed that need's the wood replaced, and has a quarter size rust hole near the fender well on driver's side, taigate is very straght with only a couple small ding's. Front clip is solid, no rust in fender's, nor inner fender's, it just need's a new inner/outer grill to make this a sharp looking truck. It has a VERY strong 350 which bark's the tire's in every gear. Tranny is a turbo 400 that seem's to have a shift kit.
Over all, all this truck need's is a grill, and some cab mount's, and it would be a good one. $1600, whole, after 3 day's and has not sold, I'll begin to part out.

*boytoytrading* · 08-09-2003, 04:33 AM

Quote:

Originally posted by boytoytrading
As a whole or will part out. 1971 Chevy with a nice factory ac,ps,pb and a tilt wheel cad. The only bad spot is the driver rocker panel. The bed is a wood bed that need's the wood replaced, and has a quarter size rust hole near the fender well on driver's side, taigate is very straght with only a couple small ding's. Front clip is solid, no rust in fender's, nor inner fender's, it just need's a new inner/outer grill to make this a sharp looking truck. It has a VERY strong 350 which bark's the tire's in every gear. Tranny is a turbo 400 that seem's to have a shift kit.
Over all, all this truck need's is a grill, and some cab mount's, and it would be a good one. $1600, whole, after 3 day's and has not sold, I'll begin to part out.

*boytoytrading* · 08-09-2003, 04:34 AM

Quote:

Originally posted by boytoytrading

*boytoytrading* · 08-09-2003, 04:37 AM

Quote:

Originally posted by boytoytrading

72_chevy · 08-09-2003, 03:29 PM

well hope u sell it but if u dont how much do u want for the engine? thanks nick

cdowns · 08-09-2003, 03:40 PM

How does the A/C work???

*boytoytrading* · 08-10-2003, 01:27 AM

If not sold within 3 day's, Motor will sell for $400. Sorry, ac is missing the compresser.

*Phillip Johnson* · 08-10-2003, 01:44 AM

Im looking for a set of mirrors that are similar tothe ones you have there. They look like the aftermarket LMC ones. i want a set of factory ones.. Can you help????

ChevyDude · 08-10-2003, 07:12 AM

SWB or LWB???

Thanks

fast71 · 08-10-2003, 07:29 AM

how much for the tilt wheel?

ljbear · 08-10-2003, 01:34 PM

BTT sent you a couple PM's

*boytoytrading* · 08-11-2003, 03:45 AM

1 more day, than it's parting time.

*boytoytrading* · 08-12-2003, 04:26 AM

Ok, it's parting time, who need's what?

72_chevy · 08-12-2003, 11:10 AM

how much do u want for the engine and any more info would be apperciated i could come pick it up?
thakns nick

**ScottH** · 08-13-2003, 03:25 PM

how much for the tilt? original truck?
Thanks.

Carl71 · 08-13-2003, 10:27 PM

Email me on your plans this weekend.. Thanks Carl

teeitup · 08-13-2003, 10:37 PM

Me too, I can be around like I told you before but I need to know approx. Thanks Randy

*boytoytrading* · 08-14-2003, 01:30 AM

Quote:

Originally posted by 72_chevy
how much do u want for the engine and any more info would be apperciated i could come pick it up?
thakns nick

The motor is a 350 with HIE, runs very good, look's like it need's a good cleaning, but other than that, there's not much more I can tell you.

zyggy72 · 08-14-2003, 03:28 PM

How much for what is left of the A/C?

Carl71 · 08-14-2003, 11:59 PM

Add SB maniford if you have them. Thanks

teeitup · 08-15-2003, 07:13 AM

I wish you would PM me or call and let me know if your coming, I have plans and can't sit around here waiting. Let me know, Thanks Randy

08-09-2003, 04:31 AM	#1
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	Very clean 71 W/ ac,ps,pb and TILT! As a whole or will part out. 1971 Chevy with a nice factory ac,ps,pb and a tilt wheel cad. The only bad spot is the driver rocker panel. The bed is a wood bed that need's the wood replaced, and has a quarter size rust hole near the fender well on driver's side, taigate is very straght with only a couple small ding's. Front clip is solid, no rust in fender's, nor inner fender's, it just need's a new inner/outer grill to make this a sharp looking truck. It has a VERY strong 350 which bark's the tire's in every gear. Tranny is a turbo 400 that seem's to have a shift kit. Over all, all this truck need's is a grill, and some cab mount's, and it would be a good one. $1600, whole, after 3 day's and has not sold, I'll begin to part out.

08-09-2003, 03:29 PM	#5
72_chevy Registered User Join Date: Dec 2002 Location: parker Posts: 87	well hope u sell it but if u dont how much do u want for the engine? thanks nick __________________ 1972 chevy 3/4 350/350 ps pb a hoss in the making 1967 dodge powerwagon 2ton 4 wheel drive(will climb over anythign)FOR SALE

08-09-2003, 03:40 PM	#6
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	How does the A/C work??? __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

08-10-2003, 01:27 AM	#7
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	Motor If not sold within 3 day's, Motor will sell for $400. Sorry, ac is missing the compresser.

08-10-2003, 07:12 AM	#9
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	SWB or LWB??? Thanks __________________ Alex 1971 Lil' Red 350 SBC 700R4

08-10-2003, 01:44 AM	#8
Phillip Johnson Account Suspended Join Date: Apr 2000 Location: Grants Pass, Oregon Posts: 1,579	Im looking for a set of mirrors that are similar tothe ones you have there. They look like the aftermarket LMC ones. i want a set of factory ones.. Can you help????

08-10-2003, 07:29 AM	#10
fast71 Drive it like U stole it Join Date: Mar 2000 Location: tunnel hill ,GA /Chatt,TN Posts: 956	how much for the tilt wheel? __________________ 71 custom 10 swb 72 nova ss 72 nova custom 87 s10 96 burb 94 camry 53 5 window 3100

08-10-2003, 01:34 PM	#11
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	BTT sent you a couple PM's __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

08-11-2003, 03:45 AM	#12
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	1 more day! 1 more day, than it's parting time. Attached Images

08-12-2003, 04:26 AM	#13
boytoytrading Account Suspended Join Date: May 2003 Location: Base of Pikes Peak, Colorado Springs Co Posts: 376	Parting Ok, it's parting time, who need's what?

08-12-2003, 11:10 AM	#14
72_chevy Registered User Join Date: Dec 2002 Location: parker Posts: 87	how much do u want for the engine and any more info would be apperciated i could come pick it up? thakns nick __________________ 1972 chevy 3/4 350/350 ps pb a hoss in the making 1967 dodge powerwagon 2ton 4 wheel drive(will climb over anythign)FOR SALE

08-13-2003, 03:25 PM	#15
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	how much for the tilt? original truck? Thanks.

08-13-2003, 10:27 PM	#16
Carl71 Registered User Join Date: Jun 2003 Location: Indiana Posts: 242	Email me on your plans this weekend.. Thanks Carl

08-13-2003, 10:37 PM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Me too, I can be around like I told you before but I need to know approx. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-14-2003, 03:28 PM	#19
zyggy72 Can't kick the addiction! Join Date: Jan 2002 Location: Riverton, CT 06065 Posts: 402	How much for what is left of the A/C?



Register or Log In To remove these advertisements.

08-14-2003, 11:59 PM	#20
Carl71 Registered User Join Date: Jun 2003 Location: Indiana Posts: 242	Add SB maniford if you have them. Thanks

08-15-2003, 07:13 AM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I wish you would PM me or call and let me know if your coming, I have plans and can't sit around here waiting. Let me know, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.