|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-21-2011, 11:04 AM
|
#1 |
|
Registered User
Join Date: Sep 2011
Location: B.C.
Posts: 137
|
New Member with a big project in the works
Hey guys I'm new to the chevy/gmc forum but my project truck is a 68 gmc long box 2wd. hopefully this project keeps me busy for a while as i want to shorten the frame for short box and swap front cross member for a 98.5 24valve 5.9 cummins turbo diesel with lots of work done, I was also thinking of closing in the open channel frame for a box frame. my goal for the motor is in the 800hp range give or take on a single turbo so I would love some feedback on some of the best rear end gears and axel shafts to use. I was thinking of doing a 2wd chevy 2500 front and rear 8 lug conversion including rear diff but i would rather keep as much off the 68 as i can except drum to disc and beefier suspension. any and all information on the suspension and rear diff to handle the added weight and high torque the engine will put out. Thank you in advance for all info.
-Allen |
|
|
|
09-21-2011, 01:51 PM
|
#2 |
|
Registered User
Join Date: Oct 2009
Location: Pepperell,Mass
Posts: 724
|
Re: New Member with a big project in the works
welcome to the site
|
|
|
|
|
09-22-2011, 11:06 AM
|
#3 |
|
Registered User
Join Date: Sep 2011
Location: B.C.
Posts: 137
|
Re: New Member with a big project in the works
thanks, anyone have some tips or advice on good rear end kits to handle the torque or would i have to swap out the rear end entirely?
__________________
12ram3500 HS mm, FP 5" tbe, SB cai, 2.5" up, 35s on 20s. SOLD 02ram2500 twin turbo, built 47re, sticks & studs : SIKDZL -youtube. 68gmc1500 soon to be: shortbox, ppumped 24valve, s467.7, dap 300s, H2O/Air intecooled, meth controlled, 47re, 14bolt, 2wd. |
|
|
|
|
09-22-2011, 03:29 PM
|
#4 |
|
Registered User
Join Date: Jul 2010
Location: Southern California CA
Posts: 1,088
|
Re: New Member with a big project in the works
Welcome to the site.....
__________________
nOtHiNg LiKe ThE gOoD oLe ChEvYs.... 
|
|
|
|
|
09-22-2011, 03:43 PM
|
#5 |
|
fat old dude
 
Join Date: Feb 2010
Location: fresno, california
Posts: 1,424
|
Re: New Member with a big project in the works
welcome!
__________________
1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations |
|
|
|
|
09-22-2011, 04:59 PM
|
#6 |
|
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
|
Re: New Member with a big project in the works
14bolt swap?
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684  support our troops! |
|
|
|
|
09-23-2011, 10:45 AM
|
#7 |
|
Registered User
Join Date: Sep 2011
Location: B.C.
Posts: 137
|
Re: New Member with a big project in the works
thanks everyone for the warm welcoming. 14 bolt rear end sounds decent i read one thread on it hopefully it will hold up cus it seems simple enough. would anyone think i would need to swap out the axle shafts also??
__________________
12ram3500 HS mm, FP 5" tbe, SB cai, 2.5" up, 35s on 20s. SOLD 02ram2500 twin turbo, built 47re, sticks & studs : SIKDZL -youtube. 68gmc1500 soon to be: shortbox, ppumped 24valve, s467.7, dap 300s, H2O/Air intecooled, meth controlled, 47re, 14bolt, 2wd. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
