dash pad removal? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jon_volk · 08-16-2003, 03:57 PM

how is the dash pad attached? i need to get this thing out.

thanks.

gldevall · 08-16-2003, 04:08 PM

Should be (4) 9/32" screws in front along bottom and (1) phillips head screw on passenger side. REmove this, push pad forward and tilt up. You will probably have to work it out as it is a kinda tight fit.

C&C Chevy · 08-16-2003, 05:04 PM

You might have to take the screws out of the gauge bezel in order to get it loose enough to take the pad out.

Taking the side molding, between the door and post, out (if equipped) makes it alot easier too.

gldevall · 08-16-2003, 05:43 PM

Yea I forgot about the dash bezel. Sorry. I just had mine out today putting in the 5" tach where the old fuel gauge was.

jon_volk · 08-16-2003, 08:26 PM

thanks. the dash had one of those cheap overlays on it and it was covering the bolts. came off pretty easily.

thanks again for the help.

08-16-2003, 03:57 PM	#1
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	dash pad removal? how is the dash pad attached? i need to get this thing out. thanks.

08-16-2003, 04:08 PM	#2
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Should be (4) 9/32" screws in front along bottom and (1) phillips head screw on passenger side. REmove this, push pad forward and tilt up. You will probably have to work it out as it is a kinda tight fit. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

08-16-2003, 05:04 PM	#3
C&C Chevy Registered User Join Date: Feb 2003 Location: Midwest City, OK Posts: 1,001	You might have to take the screws out of the gauge bezel in order to get it loose enough to take the pad out. Taking the side molding, between the door and post, out (if equipped) makes it alot easier too. __________________ Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007 Last edited by C&C Chevy; 08-16-2003 at 05:07 PM.

08-16-2003, 05:43 PM	#4
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Yea I forgot about the dash bezel. Sorry. I just had mine out today putting in the 5" tach where the old fuel gauge was. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-16-2003, 08:26 PM	#5
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	thanks. the dash had one of those cheap overlays on it and it was covering the bolts. came off pretty easily. thanks again for the help.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.