How about some pics of ADs with static dropss

[bretcopsey]

Probably not exactly what you're looking for.
This is my 51 3/4 ton. I flipped the rear axle to on top of the springs to get the rear down. I then leveled the truck to that height and cut the front frame off for the Camaro subframe. The rear is going to require a frame notch because there is only a few inches of space between the frame and axle tube. I don't have exact measurements with me, but if you look at the running board in the before picture, it is basically running at the axle center line; after it is a bit below that. It is sitting on 14" tires now, which will change.