|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-04-2011, 12:15 PM
|
#1 |
|
Registered User
Join Date: Oct 2011
Location: Bethesda, MD
Posts: 7
|
gauge cluster wiring pin removal
ok, one more question and then I'll go away.
I have to rearrange a few gauge cluster pins in the harness to accommodate a different gauge cluster. Anyone know how to remove the wires (pins) from the gauge clip ghat plugs in the back of the cluster? Thank you Thank you Thank you. Peter |
|
|
|
11-04-2011, 12:46 PM
|
#2 |
|
Registered User
Join Date: Sep 2011
Location: Stockholm
Posts: 263
|
Re: gauge cluster wiring pin removal
The connection pins have a little hook that grabs on to the plastic, I pushed the hook back a little with a needle. Then carefully wiggled them out. Canīt remember if they go back towards the cables or forward.
__________________
Tom.______________________________________ The fleet: 2007 BMW 530xi M (daily driver) 1986 C-10 Stepside (project "my time") 1992 Corvette cab (summer time daily driver) 1969 Cadilac DeVille Cab ("it just need some paint") |
|
|
|
|
11-04-2011, 12:54 PM
|
#3 |
|
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
Re: gauge cluster wiring pin removal
You can buy a specialty tool for that as well (it's also an excuse to buy tools....). I have also used a straightened out small paper clip. Basically push the wire up into the connector, release the tab with the tool of your choice, and pull the wire back.
p.s.- stay as long as you like. No need to go anywhere.
__________________
1974 Jimmy- 5.3/4L80e/NP241 |
|
|
|
|
11-04-2011, 01:04 PM
|
#4 |
|
Registered User
Join Date: Oct 2011
Location: Bethesda, MD
Posts: 7
|
Re: gauge cluster wiring pin removal
great! thanks, I'll give it a try.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
