Help with Messy Spark Plug wiring - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AustinScott · 12-21-2011, 01:29 AM

Another cheap trick is to use the ole Ziptie method. Only 1 zip tie per wire needed.
just try and leave the Tie head facing down or under the wire.

Pic for reference (just random web image)

68Stepbed · 12-21-2011, 09:39 AM

Here's what I did. These weren't hard to make either. I also used the zip tie method closer to the dist. cap to keep things bundled together.

12-21-2011, 01:29 AM	#26
AustinScott Registered User Join Date: Dec 2007 Location: Southington CT Posts: 548	Re: Help with Messy Spark Plug wiring Another cheap trick is to use the ole Ziptie method. Only 1 zip tie per wire needed. just try and leave the Tie head facing down or under the wire. Pic for reference (just random web image)

12-21-2011, 09:39 AM	#27
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: Help with Messy Spark Plug wiring Here's what I did. These weren't hard to make either. I also used the zip tie method closer to the dist. cap to keep things bundled together. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.