Need help front cab to frame mount bolts

[C10NEWGUY]

This is not my picture but will work for reference. Front cab to frame mount bolt on a 68. How do i get the bolt out as mine is rusted and the threads are stripped. I put a jack on the bolt and instead of it pushing out through cab floor it lifts the whole cab up.

[Ackattack]

I think this calls for a BFH (Big F&*^in Hammer)

[C10NEWGUY]

Originally Posted by Ackattack

I think this calls for a BFH (Big F&*^in Hammer)

I would think the floor jack would put alot more (steady) pressure than my best swing of a BFH.

[weekendracer728]

Put the jack on it with pressure and try to hit the bolt area some how to knock it loose. Or take a saw-saw and cut it off under the cab and take a air hammer to get the rest out...

[C10NEWGUY]

Odd thing is the bolt spins freely
Posted via Mobile Device

[weekendracer728]

Sounds like its hangin up on the top washer. Try to spray some lube on the bolt to free it up and take the big fun hammer to move it.

[C10NEWGUY]

turns out the sleeve had rusted and was making it stick to top washer. But the new mounts are in....