bumper guards or no bumper guards? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TX58 · 01-12-2012, 07:54 PM

about to order more parts for the 58 and was thinking about buying bumper guards for the front. I know it might not be cool for you hot rodders, but if i go old shcool?
Show yours if you got em

mknittle · 01-12-2012, 08:28 PM

I am kind of funny on that.If it were mine I wouldn't use them.That said, I do like to see them on a truck/car that is done right.Just my$0.02

SHORTDOG99 · 01-12-2012, 10:32 PM

I hope this helps you make up your mind.

azsnow · 01-12-2012, 10:45 PM

I'm putting them on my 55 Cameo, but on the other hand if I had a stepside, I wouldn't use them.

fabguy · 01-12-2012, 10:48 PM

Quote:

Originally Posted by SHORTDOG99

I hope this helps you make up your mind.

as a wise man once said to me while looking at a similar vehicle..... FIRME

sweet looking ride

Spitshineschwinn · 01-13-2012, 02:37 AM

How much are they for a set, like $200. ? Pretty expensive bling if you ask me, but they do look great. I can think of a lot of ways $200. will go on my old bomb!

SHORTDOG99 · 01-13-2012, 03:31 AM

only $200 if you are buying 2 sets....$99 bucks sounds fair for the pair already chromed.

http://www.brotherstrucks.com/prodin...number=GRD5559

azsnow · 01-13-2012, 05:53 PM

Quote:

Originally Posted by SHORTDOG99

only $200 if you are buying 2 sets....$99 bucks sounds fair for the pair already chromed.

http://www.brotherstrucks.com/prodin...number=GRD5559

I'm pretty sure that only for one. I just bought tail light hardware from them for my Cameo, listed just like this...I only got one side.

meter swinger · 01-13-2012, 08:03 PM

There not not cheap, but if its the old school custom look you want, you almost have to run them.
Posted via Mobile Device

fabguy · 01-13-2012, 11:09 PM

SHORTDOG99 is right, truck shop in anaheim has them for $100 a pr

azsnow · 01-13-2012, 11:31 PM

You have a website for them, I need a pair!

SHORTDOG99 · 01-13-2012, 11:51 PM

Ask for Conrad and tell him that SHORTDOG sent you.

http://www.truckandcarshop.com/

**mr48chev** · 01-14-2012, 12:59 AM

All I say is that as with any other part or piece you put on the truck it has to fit in with the theme of the truck. If it has all the stock chrome on it and maybe a few extra pieces they work but if the truck has the clean and mean look they won't and will look like they were stuck on as an afterthought.

TX58 · 01-14-2012, 01:12 AM

I hear you, I do want it to look like an old man's truck even though I'm only 43. I've only seen them on cameo's and fleetside trucks. Maybe I'll hold off till I figure what bed I'm going with. Would love a cameo bed but the parts are high $$$
Posted via Mobile Device

fabguy · 01-14-2012, 11:55 AM

Quote:

Originally Posted by SHORTDOG99

Ask for Conrad and tell him that SHORTDOG sent you.

http://www.truckandcarshop.com/

+100 for conrad, he is about the only person there that has a personality and knows his stuff.

hb32 · 01-14-2012, 02:48 PM

I would like to find a pair of these in white.

TX58 · 01-14-2012, 03:41 PM

Went to the link above and its great to know there's another company out there that supports getting these trucks back on the road. Im buying a set anyway to keep on hand and saw some other parts that im going to get. Thanks

01-12-2012, 07:54 PM	#1
TX58 Registered User Join Date: Dec 2011 Location: Humble,TX Posts: 287	bumper guards or no bumper guards? about to order more parts for the 58 and was thinking about buying bumper guards for the front. I know it might not be cool for you hot rodders, but if i go old shcool? Show yours if you got em

01-12-2012, 08:28 PM	#2
mknittle Registered User Join Date: Jul 2011 Location: Auburn ca. Posts: 2,886	Re: bumper guards or no bumper guards? I am kind of funny on that.If it were mine I wouldn't use them.That said, I do like to see them on a truck/car that is done right.Just my$0.02 __________________ Mark My GMC build. http://67-72chevytrucks.com/vboard/s...d.php?t=536602

01-12-2012, 10:32 PM	#3
SHORTDOG99 Registered User Join Date: Nov 2010 Location: Ontario, California Posts: 124	Re: bumper guards or no bumper guards? I hope this helps you make up your mind. Attached Images

01-12-2012, 10:45 PM	#4
azsnow Registered User Join Date: Nov 2008 Location: Usa Posts: 150	Re: bumper guards or no bumper guards? I'm putting them on my 55 Cameo, but on the other hand if I had a stepside, I wouldn't use them.

01-13-2012, 02:37 AM	#6
Spitshineschwinn Registered User Join Date: Nov 2011 Location: Montgomery AL Posts: 34	Re: bumper guards or no bumper guards? How much are they for a set, like $200. ? Pretty expensive bling if you ask me, but they do look great. I can think of a lot of ways $200. will go on my old bomb!

01-13-2012, 03:31 AM	#7
SHORTDOG99 Registered User Join Date: Nov 2010 Location: Ontario, California Posts: 124	Re: bumper guards or no bumper guards? only $200 if you are buying 2 sets....$99 bucks sounds fair for the pair already chromed. http://www.brotherstrucks.com/prodin...number=GRD5559

01-13-2012, 08:03 PM	#9
meter swinger Registered User Join Date: Apr 2009 Location: Kennewick WA. Posts: 1,437	Re: bumper guards or no bumper guards? There not not cheap, but if its the old school custom look you want, you almost have to run them. Posted via Mobile Device

01-13-2012, 11:09 PM	#10
fabguy Elev8r Man Join Date: Aug 2010 Location: Glendora, CA Posts: 835	Re: bumper guards or no bumper guards? SHORTDOG99 is right, truck shop in anaheim has them for $100 a pr __________________ 1955.2 C4 Carry-all / Suburban ---> 55.2 Build Thread!! 1958 Fleetside SWB ---> 58 Fleetside Build thread 1939 2 door sedan *My F.B. project page.*

01-13-2012, 11:31 PM	#11
azsnow Registered User Join Date: Nov 2008 Location: Usa Posts: 150	Re: bumper guards or no bumper guards? You have a website for them, I need a pair!

01-13-2012, 11:51 PM	#12
SHORTDOG99 Registered User Join Date: Nov 2010 Location: Ontario, California Posts: 124	Re: bumper guards or no bumper guards? Ask for Conrad and tell him that SHORTDOG sent you. http://www.truckandcarshop.com/

01-14-2012, 12:59 AM	#13
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: bumper guards or no bumper guards? All I say is that as with any other part or piece you put on the truck it has to fit in with the theme of the truck. If it has all the stock chrome on it and maybe a few extra pieces they work but if the truck has the clean and mean look they won't and will look like they were stuck on as an afterthought.

01-14-2012, 01:12 AM	#14
TX58 Registered User Join Date: Dec 2011 Location: Humble,TX Posts: 287	Re: bumper guards or no bumper guards? I hear you, I do want it to look like an old man's truck even though I'm only 43. I've only seen them on cameo's and fleetside trucks. Maybe I'll hold off till I figure what bed I'm going with. Would love a cameo bed but the parts are high $$$ Posted via Mobile Device

01-14-2012, 02:48 PM	#16
hb32 Registered User Join Date: Feb 2009 Location: Surrey B.C. Canada Posts: 255	Re: bumper guards or no bumper guards? I would like to find a pair of these in white. __________________ Life is too short to drive a boring vehicle.

01-14-2012, 03:41 PM	#17
TX58 Registered User Join Date: Dec 2011 Location: Humble,TX Posts: 287	Re: bumper guards or no bumper guards? Went to the link above and its great to know there's another company out there that supports getting these trucks back on the road. Im buying a set anyway to keep on hand and saw some other parts that im going to get. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.