any bagged pro-streeters out there? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jon_volk · 09-07-2003, 10:18 AM

i was thinkin......it seems like theres a split between the bagged show guys and the tubbed go type guys. wondering if anyone out there has a tubbed/blown truck that also will lay frame on bags? ive personally never seen a truck like this. seen some low prostreeters but never seen one lay frame...

low 84 · 09-07-2003, 11:22 AM

my friend has one localy. it has a rear end setup that i haven't seen before. its a bagged ladder bar setup. its pretty tight. i think we have some pics of it in my freinds digi cam, i'll try to get them. its still under construction but he drives it.

phantom dually · 09-07-2003, 10:09 PM

My truck is going to be a Phantom dually which means I am using a stock dually bed and putting a set of 33x 19.5 MT's under it. It uses the stock axle size. I am going to hopefully be laying rocker and will be bagged with a 4 link rear and notched front crossmember. I have a SBC 406 that puts out 450 hp without aluminum heads. Once I switch the heads I should get over 500!! But it is not blown!! That would be cool.

09-07-2003, 10:18 AM	#1
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	any bagged pro-streeters out there? i was thinkin......it seems like theres a split between the bagged show guys and the tubbed go type guys. wondering if anyone out there has a tubbed/blown truck that also will lay frame on bags? ive personally never seen a truck like this. seen some low prostreeters but never seen one lay frame... Last edited by jon_volk; 09-07-2003 at 01:34 PM.

09-07-2003, 11:22 AM	#2
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	my friend has one localy. it has a rear end setup that i haven't seen before. its a bagged ladder bar setup. its pretty tight. i think we have some pics of it in my freinds digi cam, i'll try to get them. its still under construction but he drives it. __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

09-07-2003, 10:09 PM	#3
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	My truck is going to be a Phantom dually which means I am using a stock dually bed and putting a set of 33x 19.5 MT's under it. It uses the stock axle size. I am going to hopefully be laying rocker and will be bagged with a 4 link rear and notched front crossmember. I have a SBC 406 that puts out 450 hp without aluminum heads. Once I switch the heads I should get over 500!! But it is not blown!! That would be cool. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.