67' small rear window cab section - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 04-03-2012, 08:24 PM

I just picked up a 67 parts truck (with not much left)
The cab is rotten for the most part but te back window area seems to be very solid. Is it worth cutting out a large section of the metal areaaround the window for converting a large to small? If so what would it be worth?

Truck also has what appear to be rear factory helper springs? Coil spring rear but has brackets at back of frame and a half leaf comes down to the back of the lower coil plate. Are these worth removing? Any idea on value?

Thanks
Richard

duallyjams · 04-04-2012, 08:08 AM

I have seen helper springs sell. On the 67-72 most people just swap the cab it's not like the 60-66 to do a conversion.Post some pics. The 67 has a lot of one year only so you might have some little things that you can sell.

**richard2717** · 04-06-2012, 08:20 AM

Thanks James
Here are a few pics. I got it mainly for the front clip. I am going to use it on the 71 blazer I think. It has some rust but it is a starting point. I knew that some things on it may be one year items only but don't know what most of them are. I know the back window, ignition and door handles were one year. but it was missing the 67' doors, the yellow ones are off the PO 68' and have no guts at all.
The cab is pretty rotten along the drip rail, floors and above the windshield but the back window, save a few dents, is in good shape. I figure I may go ahead and cut it out and just hang it on the wall for now in case someone may need it in the future

RIchard

**richard2717** · 04-06-2012, 08:23 AM

Also are these the correct seatbelts for a 67'? I know the red paint that is brushed on everywhere in the truck is not but I figure I will clean it off and see what they look like underneath

04-03-2012, 08:24 PM	#1
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	67' small rear window cab section I just picked up a 67 parts truck (with not much left) The cab is rotten for the most part but te back window area seems to be very solid. Is it worth cutting out a large section of the metal areaaround the window for converting a large to small? If so what would it be worth? Truck also has what appear to be rear factory helper springs? Coil spring rear but has brackets at back of frame and a half leaf comes down to the back of the lower coil plate. Are these worth removing? Any idea on value? Thanks Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

04-04-2012, 08:08 AM	#2
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 67' small rear window cab section I have seen helper springs sell. On the 67-72 most people just swap the cab it's not like the 60-66 to do a conversion.Post some pics. The 67 has a lot of one year only so you might have some little things that you can sell. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

04-06-2012, 08:20 AM	#3
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: 67' small rear window cab section Thanks James Here are a few pics. I got it mainly for the front clip. I am going to use it on the 71 blazer I think. It has some rust but it is a starting point. I knew that some things on it may be one year items only but don't know what most of them are. I know the back window, ignition and door handles were one year. but it was missing the 67' doors, the yellow ones are off the PO 68' and have no guts at all. The cab is pretty rotten along the drip rail, floors and above the windshield but the back window, save a few dents, is in good shape. I figure I may go ahead and cut it out and just hang it on the wall for now in case someone may need it in the future RIchard Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

04-06-2012, 08:23 AM	#4
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: 67' small rear window cab section Also are these the correct seatbelts for a 67'? I know the red paint that is brushed on everywhere in the truck is not but I figure I will clean it off and see what they look like underneath Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.