speedo question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76bonanza · 09-21-2003, 08:15 PM

I have lubed my cable with lythium grease and almost all of the bounce in needle went away.

But it still bounce between 30 and 40 only is it the speedo and is there any way to rebuild a speedo?

76bonanza · 09-22-2003, 07:37 AM

ttt

gchemist · 09-22-2003, 08:29 PM

Check your cable for any short turns. The cable shoul be as straight as possible and have long bends up to the speedo. You can also remove the speedoo and use a small oil dropper to lube it.

09-21-2003, 08:15 PM	#1
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	speedo question I have lubed my cable with lythium grease and almost all of the bounce in needle went away. But it still bounce between 30 and 40 only is it the speedo and is there any way to rebuild a speedo? __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO Last edited by 76bonanza; 09-22-2003 at 07:37 AM.

09-22-2003, 07:37 AM	#2
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	ttt __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

09-22-2003, 08:29 PM	#3
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Check your cable for any short turns. The cable shoul be as straight as possible and have long bends up to the speedo. You can also remove the speedoo and use a small oil dropper to lube it. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.