|
05-15-2012, 09:55 PM
|
#2 |
|
Senior Member
 
Join Date: Jan 2011
Location: Hayes Va
Posts: 4,569
|
Re: bearings
On most 9 inch fords there are two bearings. One is much bigger than the other. The easy way to check the bearing needed is to look at the size of the studs holding the backing plates. 1/2" is the big bearing and 3/8 is the small one. This works with axles with up to 33 or 35 splines with most manufactures. When yo go to 40 spline all are the big bearing ends and the bearing has a larger id.
Jimmy
__________________
60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode