The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-27-2012, 03:56 PM   #1
84_chevy
Registered User
 
Join Date: Aug 2009
Location: Toronto, Ontario
Posts: 111
Oil Presure

Just got my oil presure Gage working again, for some reason the blue wire to the sender unit was not connected. By luck I found a tan wire coming out of the firewall block that controlled the dash Gage. There must be a mix up in the wiring under the dash somewhere that I have yet to hunt down. My question now is what should be the operating Presure for the oil, mine is just over 400Kpa, normal?
Posted via Mobile Device
84_chevy is offline   Reply With Quote
Old 05-27-2012, 05:05 PM   #2
bilfman
Registered User
 
bilfman's Avatar
 
Join Date: Dec 2011
Location: Regina, SK, Canada
Posts: 622
Re: Oil Presure

That is about 60 pounds of pressure and is good side of normal.
__________________
1979 Chevy Dually Crew 4X4 454, D60 Tru-trac, D70 Detroit Locker, 3.73, 4L80E/NP205

1971 GMC 3/4 Ton 4X4
bilfman is offline   Reply With Quote
Old 05-27-2012, 05:21 PM   #3
frog210
Registered User
 
Join Date: Mar 2012
Location: San Antonio, Tx
Posts: 784
Re: Oil Presure

not high jacking but,
my oil pressure is around 30 when idling but goes upto 60 when given gas
is that normal
frog210 is offline   Reply With Quote
Old 05-27-2012, 09:06 PM   #4
84_chevy
Registered User
 
Join Date: Aug 2009
Location: Toronto, Ontario
Posts: 111
Re: Oil Presure

Mine goes straight to 400 at idiling, then up to 410 or so Kpa, sorry for the metric but it's a Canadian car and that's all I have to go by. Not sure how to convert Kpa to psi.
Posted via Mobile Device
84_chevy is offline   Reply With Quote
Old 05-27-2012, 09:32 PM   #5
tucsonjwt
Registered User
 
Join Date: Jul 2007
Location: Tucson, AZ
Posts: 3,189
Re: Oil Presure

My 73 and 83 454 C20s both had 45# at idle, very slight creep up toward 50#-60# under load. As a mechanic once told me "Don't worry about the high pressure, worry about the low pressure." If your engine is running well, then I would just look for a change in pressure (pressure drops.)
tucsonjwt is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:11 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com