Wanted Dash Plastic Lens '87 K10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1987 blues · 09-27-2003, 05:03 PM

tHIS IS THE PLASTIC LENS THAT FITS BETWEN behing THE INSTRUMENT BESEL AND the lens retainer.
Would like one in brand new conditions. If it has scratches they need to be very small, almost invisible.

The one I have on , has scratches and since I am restoring I need one better than the one I have.
I am sure there is one out there somewhere.

thanks

al

loweredd · 09-29-2003, 03:07 PM

Have you tried 3M plastic polish? I used that on mine, and it looks almost brand new!

1987 blues · 09-29-2003, 03:13 PM

I never thought of that!!! I think I will try it!! where can I get it?
A car part store? etc./...
Let me know if you can. I will pick one up after work.
Mine needs a bit of worl. I have a few highly noticeable scratches. Hope they come out.

thanks again ..

al

loweredd · 09-29-2003, 03:15 PM

oh yeah, we sell it here....Mequires sells it too. They should have it at any parts store.

1987 blues · 09-29-2003, 06:11 PM

thanks again. I will pick one up tomorrow at lunch and then work on it . Let's see what happens. I am now in the proces of painting my dash bezel and panel. So far, so good. I am really happy with the results so far.

Take care and thanks for your time.

al

loweredd · 09-29-2003, 06:19 PM

no problem. I went to buy one at GM, and the said DISCONTINUED, so I tried the next best thing!

1987 blues · 09-29-2003, 09:57 PM

I hear that!! They are really hard to find!!
i will keep you informed as to how mine will turn out.
thanks again

al

1987 blues · 09-29-2003, 10:09 PM

By the way, I forgot to tell you that if you want to buy a new one, LMC Truck has them for about 40.00.
Their number is 1-800-222-5664 or on line at www.LMCtruck.com

they are listed on page 50 of their 2003 fall edition catalog for 1973-87 trucks.
Just in case you are looking to buy a new one.
later.

al

09-27-2003, 05:03 PM	#1
1987 blues Registered User Join Date: Jun 2003 Location: lubbock, texas Posts: 57	Wanted Dash Plastic Lens '87 K10 tHIS IS THE PLASTIC LENS THAT FITS BETWEN behing THE INSTRUMENT BESEL AND the lens retainer. Would like one in brand new conditions. If it has scratches they need to be very small, almost invisible. The one I have on , has scratches and since I am restoring I need one better than the one I have. I am sure there is one out there somewhere. thanks al Last edited by 1987 blues; 09-27-2003 at 05:06 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-29-2003, 03:07 PM	#2
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	Have you tried 3M plastic polish? I used that on mine, and it looks almost brand new!

09-29-2003, 03:13 PM	#3
1987 blues Registered User Join Date: Jun 2003 Location: lubbock, texas Posts: 57	I never thought of that!!! I think I will try it!! where can I get it? A car part store? etc./... Let me know if you can. I will pick one up after work. Mine needs a bit of worl. I have a few highly noticeable scratches. Hope they come out. thanks again .. al

09-29-2003, 03:15 PM	#4
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	oh yeah, we sell it here....Mequires sells it too. They should have it at any parts store.

09-29-2003, 06:11 PM	#5
1987 blues Registered User Join Date: Jun 2003 Location: lubbock, texas Posts: 57	thanks again. I will pick one up tomorrow at lunch and then work on it . Let's see what happens. I am now in the proces of painting my dash bezel and panel. So far, so good. I am really happy with the results so far. Take care and thanks for your time. al

09-29-2003, 06:19 PM	#6
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	no problem. I went to buy one at GM, and the said DISCONTINUED, so I tried the next best thing!

09-29-2003, 09:57 PM	#7
1987 blues Registered User Join Date: Jun 2003 Location: lubbock, texas Posts: 57	I hear that!! They are really hard to find!! i will keep you informed as to how mine will turn out. thanks again al

09-29-2003, 10:09 PM	#8
1987 blues Registered User Join Date: Jun 2003 Location: lubbock, texas Posts: 57	By the way, I forgot to tell you that if you want to buy a new one, LMC Truck has them for about 40.00. Their number is 1-800-222-5664 or on line at www.LMCtruck.com they are listed on page 50 of their 2003 fall edition catalog for 1973-87 trucks. Just in case you are looking to buy a new one. later. al



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.