|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
07-06-2012, 11:57 PM
|
#1 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Trouble mounting Chevy Cab on GMC frame
It sounds to me like you have a '60-'62 Chevy cab sitting on a '63 GMC frame. Are the front cab mount holes too far apart? Are there 2 holes where the master cylinder would be? If so then you have a '60-'62 Chevy cab. The VIN on the cab will tell you for sure also.
As was already said, just drill 2 new holes, and move the dished washers over. They are spot welded to the floor.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
